Kantronics KAM 98, Руководство пользователя

Страница: 338 / 384

If m = 1 (or 0), a BLACK/WHITE decision is made on each sample. If m is spec-
ified as 2, two bits of data representing 4 grey levels are conveyed to the serial
port for each pixel, and if m is set to 4, 4 bits representing 16 grey levels are con-
veyed to the serial port.
+ To avoid overrunning the serial port, set the serial port’s rate to greater than (n) x
(m) x (1/8) X (10).
A special computer program must be used to display WEFAX maps sent via the
serial port. Superfax II (dos), by Kantronics, displays black/white images only.
Windows programs to also include grey scale are under consideration at this
time. Example: When using Superfax, set WEFAX to 1280 1.
See also: daytweak, WEFAX Reception in Packet Modes of Operations section
WTEXT message (up to 128 characters)
default {DE mycall}
This entry specifies the text to be sent in response to a WRU command while in
AMTOR ARQ mode only. Enter any combination of characters and spaces up to
a maximum length of 128. Entering a single % will clear WTEXT.
To use the WTEXT as an automatic logon for APLINK BBS systems, set the
WTEXT to “DE call/?” or “QRA call/?”. Be sure to include the
“+?” as part of the WTEXT.
+ To use the WTEXT as an auto logon for commercial radio telex (e-mail) services
on HF (such as WLO or Globe Wireless), set WTEXT to the “account number”
they provide you. Check with them for the exact form the account number must
take when placed in the WTEXT.
Command Reference KAM’98 Commands
User’s Guide 320 KAM’98 v 8.3