Kantronics KAM 98 Скачать руководство пользователя страница 304

Страница: 304 / 384

and Kantronics KA-Nodes will be identified as:

MYNODE

(MYCALL)

An asterisk"*" indicates that the station was heard through a digipeater. The

date/time the station was last heard is also displayed. If the S option is used, i.e.

NDHEARD S, then only the callsigns of the stations heard will be displayed.

If the L option is selected, all callsigns contained in the received packet are dis-

played (see MHEARD for display format). If the C option is used, the list of

nodes is cleared.

See also:

mynode

NDWILD

{ON | OFF}

default OFF
When OFF, the KA-Node will only recognize connect requests directed to the

MYNODE call. When ON, connect requests to any SSID of the MYNODE call

will be recognized as connects to the KA-Node, if that SSID is not being used for

any other ID in the TNC.

See also:

myalias, mycall, mynode, mypbbs, myremote

NEWMODE

{ON | OFF}

default ON
When ON, the TNC will return to Command Mode if the station on the current

I/O stream disconnects. The TNC will not return to Command Mode if the station

disconnecting is on a different stream. When OFF, a disconnect will not cause the

TNC to change modes.

See also:

connect, disconnect, status

NOMODE

{ON | OFF}

default OFF

Command Reference

KAM’98 Commands

User’s Guide

286

KAM’98 v 8.3

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды