Kantronics KAM 98, Руководство пользователя

Страница: 253 / 384

If BREAK is ON, a break at the keyboard causes a return to Command Mode
from Converse or Transparent Mode.
See also: COMMAND
BTEXT text (0 - 128 characters)
default (blank)
BTEXT specifies the content of the data portion of the beacon packet. Any com-
bination of characters and spaces may be used with a maximum length of 128.
Entering a single “%” will clear BTEXT.
See also: beacon
BUDLIST [ON|OFF] [NONE | {+|-}call | call1,call2,...]
where call={callsign | {<|>}callsign |
callsign{>|<>}callsign}
default OFF NONE
BUDLIST is used to determine which received packets will be monitored. When
OFF or NONE, BUDLIST will allow monitoring of all packets, even if it has
callsigns in it’s list.
The maximum number of callsigns allowed in BUDLIST is 10. Up to 10
callsigns may be entered at once, using the format shown after the command
name, and the new list of from 1 to 10 callsigns will replace whatever list was
there before. The BUDLIST command can be used to add a single callsign
(+callsign), so long as there is room for the new callsign on the list (if there is
not, the TNC responds with “EH?” and returns you to the command prompt).
Similarly, you can remove a single callsign (-callsign) from the list. And to re-
move all items from the current list, enter BUDLIST NONE.
A callsign entered without a SSID will match any SSID of that callsign. To match
a specific SSID only, enter the callsign with that SSID: for example, callsign-n,
where n = 0-15.
KAM’98 Commands Command Reference
KAM’98 v 8.3 235 User’s Guide