Kantronics KAM 98 Скачать руководство пользователя страница 252

Страница: 252 / 384

When ON, the sequence backspace-space-backspace is sent to the attached termi-

nal when the DELETE character is entered. When OFF, the backslash character

“\” is sent to the terminal when the DELETE character is entered.

See also:

delete, redisplay

BLT

n {EVERY | AFTER} hh:mm:ss

[START hh:mm:ss] [CLEAR]

(n = 1 - 4)

default EVERY 00:00:00 (for each of the 4 LT strings)
This command (used with GPS) sets the interval between beacons for the

associated LT (Location Text) string.
n identifies which LT is used (1-4). If EVERY is specified, the LT will be trans-

mitted at the interval specified by the hh:mm:ss parameter. This is set in

hours:minutes:seconds, and all characters must be specified. If the optional key

word START is given followed by a time (in 24 hour format), the beacons will

not be transmitted until the specified time. The beacon will then be transmitted

according to the setting of the EVERY parameter. (NOTE: If the current time is

past the start time, the beacon will start at the next scheduled interval based on

the start time.)
If AFTER is specified, the beacon will be transmitted once after no activity is de-

tected on the channel for hh:mm:ss time. Selecting AFTER does not allow the

optional START parameter.
For example, setting BLT 3 EVERY 00:15:00 START 03:30:00 would cause the

third LT string (LT 3) to be transmitted every 15 minutes, with the first transmis-

sion each day occurring at 03:30:00.
If CLEAR is specified, the LT buffer is cleared after transmission.

BREAK {ON | OFF}

default OFF

Command Reference

KAM’98 Commands

User’s Guide

234

KAM’98 v 8.3

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды