Kantronics KAM 98 Скачать руководство пользователя страница 297

Страница: 297 / 384

the originating station and the destination station callsigns are displayed for mon-

itored packets.

See also:

monitor

MSTAMP

{ON | OFF}

default OFF
This command enables time stamping of monitored packets. The date and time

information is then available for use for automatic logging of packet activity or

other computer applications. The date and time are set initially by the DAYTIME

command, and the date format is determined by the DAYSTR command. The

MONITOR command must be ON for this command to work, and if connected

MCON must also be ON.

See also:

cstamp, daytime, monitor

MXMIT

{ON | OFF}

default ON
When ON, the KAM’98 will display transmitted packets as monitored data on

your terminal. Repeated packets will be displayed as they are sent over the radio.

The frames to be displayed will be controlled by the MONITOR, MCOM,

MCON, and MRESP commands, and will obey the settings of TRACE,

MSTAMP, HEADERLN, 8BITCONV and FILTER commands.

See also:

monitor

MYALIAS

xxxxxx-n

(n = 0-15)

default disabled
Setting this command to a callsign or character string enables digipeating by us-

ing the MYALIAS. Enter up to six characters (plus optional SSID) which are dif-

ferent than those used for MYCALL, MYNODE, MYPBBS, or MYREMOTE.

KAM’98 Commands

Command Reference

KAM’98 v 8.3

279

User’s Guide

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды