Kantronics KAM 98, Руководство пользователя

Страница: 328 / 384

+ If STREAMSW is set to the dollar sign ($24) you will need to enter parameter
values in decimal. Alternatively, precede the $ with the PASS character in order
to enter hex numbers.
The character selected can be PASSed in the Convers Mode by using a special
PASS character, and will always be passed as data in the Transparent Mode. If
operating in the Transparent Mode and you wish to change streams, you must
first return to the Command Mode.
See also: maxusers, pass, status
SUPLIST [ON|OFF] [NONE | {+|-}call | call1,call2,..]
where call={callsign | {<|>}callsign |
callsign{>|<>}callsign}
default OFF NONE
SUPLIST is used to determine which received packets will not be displayed, i.e.
suppressed. When OFF or NONE, SUPLIST will not prevent the display of
packets, even if it has callsigns in it’s list.
The maximum number of callsigns allowed in SUPLIST is 10. Up to 10 callsigns
may be entered at once, using the format shown after the command name, and the
new list of from 1 to 10 callsigns will replace whatever list was there before. The
SUPLIST command can be used to add a single callsign (+callsign), so long as
there is room for the new callsign on the list (if there is not, the TNC responds
with “EH?” and returns you to the command prompt). Similarly, you can remove
a single callsign (-callsign) from the list. And to remove all items from the cur-
rent list, enter SUPLIST NONE.
A callsign entered without a SSID will match any SSID of that callsign. To match
a specific SSID only, enter the callsign with that SSID: for example, callsign-n,
where n = 0-15.
Selective display is enabled when one or two callsigns are combined with a “>”
and/or “<” character. For example, entering “>callsign” will disable display of
packets TO that callsign (assuming SUPLIST is ON), entering “<callsign” will
disable display of packets from the callsign, entering “callsign1>callsign2" will
Command Reference KAM’98 Commands
User’s Guide 310 KAM’98 v 8.3