Kantronics KAM 98, Руководство пользователя

Страница: 301 / 384

This command sets the callsign used for remote access of the TNC. Enter up to
six characters (plus optional SSID) which are different than those used for
MYCALL, MYALIAS, MYNODE, or MYPBBS. In addition, the RTEXT must
be programmed with a text string. A station that connects will be sent a series of
numbers that must be decoded according to RTEXT.
See also: rtext; remote access section
MYSELCAL {cccc | nnnn | nnnnn | cccccccc |
nnnnnnnnn | callsign}
default {based on mycall}
The selcal specified by this command will be recognized, when operating in
AMTOR Mode A, as your station identification. The convention used for
AMTOR selcals is to use the first letter and the last three letters of your callsign
as your 4-character selcal. The MYSELCAL will also accept 4 or 5 digit numbers
and generate the corresponding 4-character selcal automatically from these num-
bers.
If you enter 7 characters, 9 numbers, or an amateur radio callsign, this command
will use this as your 7-character selcal for the CCIR 625 form of AMTOR opera-
tion. If you choose to enter your own seven characters, you must remember that
the CCIR 625 recommendation does not allow the use of the letters G, H, J, L, N,
or W. You must use the MYSELCAL command twice to change both the
4-character and the 7-character selcal. The KAM’98 keeps both selcals and will
respond to either one automatically.
See also: amtor, fec.
NAVCLR
immediate
KAM’98 Commands Command Reference
KAM’98 v 8.3 283 User’s Guide