Kantronics KAM 98 Скачать руководство пользователя страница 271

Страница: 271 / 384

This command sets the character to be used as the delete character. When this

character is typed, the last input character is deleted. The most common settings

are $08 (backspace) and $7F (delete).

See also:

bkondel

DIDDLE

{ON | OFF}

default ON
When ON, a diddle character is sent when no characters are available from the

keyboard or buffer during transmission in RTTY or ASCII mode. In RTTY, the

diddle character is the LTRS character; in ASCII, the diddle character is a null.

When OFF, a constant MARK frequency is transmitted.

DIGIPEAT

{ON | UIONLY | OFF}

default ON
When ON, any packet received that has MYCALL, MYALIAS, or MYNODE

(if KA-Node is active) in the digipeat list of its address field will be

retransmitted. Each station included in the digipeat list relays the packet in the or-

der specified in the address field. Digipeating takes place concurrently with other

TNC operations and does not interfere with normal connected operation of the

station. To disable digipeat operations (via MYCALL, MYALIAS, or MYNODE)

turn this command OFF.
If UIONLY is selected, the TNC will digipeat UI frames only (DIGIPEAT affects

only MYCALL, MYNODE, and MYALIAS).

See also:

hid, myalias, mycall, mynode

DISCONNE [MYPBBS | MYREMOTE | MYNODE x ]

(x=KA-Node)

immediate

KAM’98 Commands

Command Reference

KAM’98 v 8.3

253

User’s Guide

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды