Kantronics KAM 98 Скачать руководство пользователя страница 293

Страница: 293 / 384

MHEARD

[SHORT | LONG | CLEAR]

immediate
This command causes display of a list of stations heard. An asterisk, *, indicates

that the station was heard through a digipeater. The date/time the station was last

heard is also displayed.
If the S option is used, i.e. MHEARD S, then only the callsigns of the stations

heard will be displayed.
If the L option is selected, all callsigns contained in the received packet including

the digipeater paths, are displayed. For example:

NØGZZ > ID

10/16/88 14:31:30

VIA TOP,KCI,WØXI

Here, your station heard NØGZZ transmitting an ID packet. NØGZZ was also

using the digipeating path TOP, KCI, WØXI. If your station heard NØGZZ via

one of these other stations, an asterisk would show by the call or alias of the last

digipeater heard. When listed short, the asterisk would show beside NØGZZ.

+ Whenever PASSALL is ON, packets will not be checked for errors and no addi-

tions will be made to the MHEARD list.
If the C option is used, the list is cleared.

See also:

daytime, passall

MHEADER

{ON | OFF}

default ON
When ON, the headers are displayed for all monitored packets.
When OFF, headers are not displayed and only data is output to the terminal.

Since only I and UI frames have data, only these frames are displayed.

+ To avoid confusion when MHEADER is OFF, use BUDLIST to restrict the moni-

tored data.

See also:

monitor,mcon,mbeacon,mall,suplist,budlist

KAM’98 Commands

Command Reference

KAM’98 v 8.3

275

User’s Guide

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды