Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Скачать руководство пользователя страница 40

Страница: 40 / 104

•

Management IP—Enter

to select interface eth0 or eth1 as the primary IP address for

your management server. Once configured, the setup program displays the IP address
for the interface you selected.

•

NSM super password—Enter

to specify an NSM “super” password. This password

must be at least eight characters long and is case-sensitive. This password is used by
the NSM superuser (also referred to as the NSM administrator). This user has the
highest level of privileges in NSM.

•

GUI Server one-time password—Enter

to specify this password. This password

authenticates this server to its peer in a high-availability configuration, and to regional
servers.

•

Menu: High Availability—Enter

to open a menu to configure HA. See “Configuring High

Availability” on page 20.

•

Menu: Advanced Options—Enter

to open a menu of additional options, including the

port number for receiving messages through the NSM API, and remote database
replication details.

The following sections provide procedures for configuring HA and advanced options:

•

Configuring High Availability on page 20

•

Configuring Advanced Options on page 22

Configuring High Availability

To configure high availability (HA), from the NSM Configuration Main menu, enter

. The

NSMXpress Series II appliance displays the High Availability menu:

1> High Availability [n]
Whether to enable HA on this server or not

2> Primary Status [y]
If 'y', this machine is a Primary Server
and if 'n' this machine is a Secondary
Server

3> HA Remote IP []
IP address for the peer's primary
heartbeat link

4> HA Link Failure Detection IP []
IP address outside the HA cluster

5> HA Inter-server password []
Shared password for heartbeat

6> Menu: Shared Disk [Off]

7> Menu: HA Links

8> Menu: HA Advanced Settings

The following options are available to configure HA.

NSMXpress Series II User Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01




























































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды