Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Страница: 30 / 104

NOTE: These values are not case-sensitive. However, the uppercase N
indicates it is the default value. Any keystroke, including Enter but not y
or Y, accepts the default value.
4.
Go to “Installing and Configuring NSM from the CLI” on page 11 for information about
how to install and configure NSM on your NSM appliance from the CLI.
NSMXpress Series II Users
NSMXpress Series II has three user levels. All users log in as the “admin” user. To use the
command line to administer NSM, change to the “nsm” user. For advanced administration,
change to the “root” user.
The following users are available to manage NSMXpress Series II.
•
“admin” user—Logs into the NSMXpress Series II setup program and changes to “nsm”
user or “root” user from the command line.
• “nsm” user—Administers NSM services. To change to the “nsm” user from the “admin”
user, go to the $ prompt, enter
sudo su - nsm for the $ nsm prompt, then enter the
“admin” password you set when logging into the NSMXpress Series II appliance. To
return to the “admin” user, enter
exit at the $ prompt.
• “root” user—Administers advanced system settings. To change to “root” user from the
“admin” user, go to the $ prompt, enter
sudo su - root for the # root prompt, then enter
the “admin” password you set when logging into the NSMXpress Series II appliance.
To return to the “admin” user, enter
exit from the # prompt.
Web Interface Configuration
To finish initial setup from a Web interface, use the following steps.
1.
Copy the URL (starting with
https://
) from the terminal emulator after installing
NSMXpress Series II:
Your NSMXpress is now active on the network.
To configure your system via a web browser, connect to:
https//10.150.43.205/administration
2.
Open a Web browser and paste the URL into the address text box.
3.
Press Enter to open the NSMXpress Series II login page.
4.
Enter the admin user name and password and then click Login.
5.
See “Configuring NSM from the Web Interface” on page 29 for details about how to
install and configure NSM on your NSMXpress Series II appliance from the Web
interface.
Copyright © 2010, Juniper Networks, Inc. 10
NSMXpress Series II User Guide