Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Скачать руководство пользователя страница 38

Страница: 38 / 104

Enabling and Configuring Remote Replication of the Database

On the Advanced Options menu, enter

to open a menu that allows you to mirror the

daily backup to an external server. You can toggle it on or off. After you turn it on, use the
menu options to configure this option:

1> Remote Replication of Database [n]
If 'y', local backups will be sent to a remote backup machine

2> Hour of day to Replicate Database [02]
Hour to start a backup

3> Remote backup IP [ ]
IP address of a remote backup machine

4> Remote Replication Timeout (seconds) [1800]
Rsync Command Backup Timeout (seconds)
(Default is 1800 seconds)

The screen always shows the current status of the remote backup database. If no status
exists, the option has not yet been configured.

•

Remote Replication of Database—Enter

to turn remote replication on or off. At the

next prompt, enter

to change the state.

•

Hour of day to Replicate Database—Enter

to start the backup at the specified time.

The valid range is 00-23.

•

Remote Backup IP—Enter

to specify the IP address of the remote backup machine.

Backup information is copied to the

/var/netscreen/dbbackup

directory on the remote

server. The “nsm” user must exist on both servers and you must establish an SSH trust
relationship. See the

Network and Security Manager Installation Guide

for details.

•

Remote Replication Timeout—Enter

to time out the remote backup. The valid range

is 1-65535 seconds.

Enabling and Configuring the Statistical Report Server

The following options are available to configure the statistical report server (SRS):

NOTE:

SRS must be installed on a separate server from NSM.

1> SRS [n]
Statistical Report Server will be used with this GUI Server

2> SRS DB IP []
Database server IP address

3> SRS DB Type [pgsql]
Database Type

4> SRS Database Name [netscreen]
Database name

5> SRS DB Owner Name [netscreen]
Database user name

NSMXpress Series II User Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01




























































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды