Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Страница: 45 / 104

1.
On the NSMXpress Series II Settings menu, enter 3 at the prompt.
2.
Enter one of the following options:
• 1 to change default gateway options.
Follow the prompts to change the IP address of the default gateway and return to
the NSMXpress Series II Settings menu.
• 2 to change the static routing options.
Follow the prompts to add a new static route and return to the NSMXpress Series II
Settings menu.
Changing the NSMXpress Series II Hostname
To change the hostname:
1.
On the NSMXpress Series II Settings menu, enter 4 at the prompt.
2.
Enter y at the verification prompt to continue.
3.
Enter the new hostname and press Enter to return to the Settings menu.
NOTE: If a hostname consisting of 4 or more labels is changed to a different
hostname, also with 4 or more labels, the previous hostname alias might
remain in the
/etc/hosts file. This condition can be corrected by manually
editing the /etc/hosts file.
Adding DNS Servers
You can add up to three DNS servers. Enter each one using dotted decimal notation.
Each addition returns you to the main menu. If you want to add more DNS servers, repeat
the following procedure.
To add the DNS servers:
1.
On the NSMXpress Series II Settings menu, enter 5 at the prompt.
2.
Enter 1 to add a name server.
3.
When prompted, enter the new nameserver in dotted decimal notation.
Setting the System Time
You can change time zones or the Network Time Protocol (NTP) configuration. The
default time zone is set for Pacific Standard Time (PST)/Pacific Daylight Time (PDT).
Select time zones in the following order:
• Continent or ocean
• Country
•
Region
25 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Installing and Configuring NSM from the CLI