Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Скачать руководство пользователя

Страница: 84 / 104

Network Utilities

To access basic network utilities (ping, traceroute, and nslookup) for TCP/IP Networking,
select

Troubleshooting > Network Utilities

. These tools also provide an IP subnet

calculator. SeeFigure 46 on page 64.

Figure 46: Network Utilities Options

Ping

Ping is a tool for checking network connectivity. The NSM appliance prompts you with
questions so you can focus your search.

Figure 47 on page 64 shows an example.

Figure 47: Ping Utility

How Many Packets

Enter the number of packets this ping command will send. The default is 5. The values
range from 1-99.

Packet Size

Enter the packet size (in bytes) this ping command will send. The default is 56. The values
range from 1-9999.

How Many Sec Between Sending Each Packet

Enter how much time (in seconds) ping should wait between sending each packet.

Patterns to Send (Hex)

The data sent by ping contains a hexadecimal pattern. If you leave this option blank, ping
will fill it with random data. This option is useful if you do not have problems with
connectivity itself but with data loss.

NSMXpress Series II User Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01




























































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды