Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Страница: 52 / 104

See the Network and Security Manager installation Guide for more information about
NSM licensing.
9.
Click Submit to save any changes, and then click Install to install the software.
Configuring High Availability
To configure high availability (HA) settings:
1.
On the NSM Configuration Main Menu, click Menu next to High Availability to access
HA options. See Figure 5 on page 32.
Figure 5: High Availability Options
2.
Use the High Availability option to turn HA on ( y ) or off ( n ). The default is off.
3.
Use the Primary Status option to set your NSMXpress Series II as either the primary
or secondary server in the HA cluster. If you select
y , it is the primary server (the default).
If you select n , it is the secondary server.
4.
Use the HA Remote IP option to enter the IP address for the HA peer in the HA cluster.
5.
Use the HA Link Failure Detection IP option to enter the IP address of a computer
outside the HA cluster that you can ping to verify connection status.
6.
Use the HA Inter-server password option to enter the heartbeat password used
between the primary and secondary servers.
7.
Click Submit to save the changes.
8.
(Optional) Click Menu next to Shared Disk (see Figure 5 on page 32) to configure a
shared disk for regional servers (see Figure 6 on page 33) or for central managers (see
Figure 7 on page 33).
Copyright © 2010, Juniper Networks, Inc. 32
NSMXpress Series II User Guide