Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Скачать руководство пользователя страница 37

Страница: 37 / 104

•

Menu: HA Advanced Settings—Enter

to open a menu to configure HA advanced

settings. For more information on options available to you for custom settings, refer
to the

Network and Security Manager Installation Guide

1> HA Heartbeat Frequency [15]
Time interval in seconds between heartbeat messages (Default is 15
seconds)

2> HA Heartbeat Failure Threshold [4]
Number of missing heartbeat messages before automatic switchover
occurs (Default is 4 missing messages)

3> HA Data Replication Timeout [1800]
Rsync Command Replication Timeout (Default is 1800 seconds)

4> Return to high Availability menu

Configuring Advanced Options

The Advanced Options menu provides the following configuration options:

Menu: Advanced Options

1> https port for NBI service [8443]
The port number to listen for NBI
(Default is 8443)

2> Menu: Remote Replication of Database [Off]

3> Menu: SRS [Off]

M> Main Menu
R> Redraw menu

Choice [1-3,M,R]:

You have the following options:

•

https port for NBI service—Enter

to change the port number for listening for messages

for the NSM API. In response to the prompt, enter a value in the range 1025 through
65535. Any number outside this range returns an error message. The default value is
8443.

•

Menu: Remote Replication of Database—Enter

to display a menu of options for

configuring the time of day to take the backup, the location of the backup, and timeout
value.

•

Menu: SRS—Enter

to open a menu to configure Statistical Report Server (SRS).

The following sections provide details about configuring remote backup and SRS:

•

Enabling and Configuring Remote Replication of the Database on page 18

•

Enabling and Configuring the Statistical Report Server on page 18

Chapter 2: Installing and Configuring NSM from the CLI

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01




























































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01

Бренды по названию

Популярные бренды