Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Страница: 70 / 104

•
Description—A brief description of the appliance.
4.
Click Save .
SNMP Trap Configuration
To configure SNMP trap conditions:
1.
Select System Administration > SNMP Monitoring .
2.
Select the SNMP Traps tab, which is shown in Figure 35 on page 50.
Figure 35: Configuring SNMP Traps
3.
In the Manager IP field, enter the IP address of the SNMP management server.
4.
Select from the following trap conditions:
• Disk space low
Enter the percentage of free disk space below which SNMP issues a trap.
•
Memory low
Enter the percentage of free memory below which SNMP issues a trap.
•
CPU high
Enter the percentage of CPU use over which SNMP issues a trap.
•
NSM start/stop
•
Admin Logon/Logoff
• External IP unreachable
Enter the IP address of the required device.
5.
Click Save .
Copyright © 2010, Juniper Networks, Inc. 50
NSMXpress Series II User Guide