Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01, Руководство пользователя

Страница: 85 / 104

Verbosity Output
The NSM appliance lists the ICMP packets (other than ECHO_Response) that have been
received.
Numeric Output Only
Check this option if you do not want any attempts to be made to look up symbolic names
for host addresses.
Bypass Routing Tables
If the host is not a directly attached network, an error is returned. This option can be used
to ping a local host through an interface that has no route through it.
Traceroute
Traceroute is a tool to print the route a packet takes to a network host. See Figure 48 on
page 65.
Figure 48: Traceroute Utility
NOTE: The only required field is Hostname. The value can be either a
hostname or an IP address.
Lookup
Use the lookup tool to obtain the IP address from a hostname and the hostname from
an IP address (see Figure 49 on page 66). The query type drop-down list contains several
types of records found in the DNS database. Enter a nameserver or select the default. If
you choose the default, nslookup uses the server on which NSMXpress Series II is installed.
65 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring NSM from the Web Interface