manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

SSL VPN Secure Access Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Juniper Networks IC Series Unified Access Control Appliances . . . . . . . . 21
Extranet Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Distributed Data Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Device Schemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Scaling and Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Working in the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Characters Not Supported in Login Passwords . . . . . . . . . . . . . . . . . . . . . . . . 23
Managing Blocked Login Attempts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configuring UI Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
UI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Navigation Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Common Tasks Pane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Main Display Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

NSM Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Investigate Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Configure Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Administer Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Validation Icons in the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Validation and Data Origination Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Working with Other NSM Administrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Searching in the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Contains String [C] Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Starts With [S] Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Regular Expression [R] Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
IP [I] Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Search for an Exact Match (E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Global Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 2

Planning Your Virtual Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Configuring Devices Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Importing Existing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Modeling New Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Editing a Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Configuring IDP-Capable Devices Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Common Criteria EAL2 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Guidance for Intended Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Guidance for Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Guidance for Physical Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Supported IDP-Capable Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Enabling Jumbo Frames (ISG1000 Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Enabling IDP Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Adding an ISG2000/ISG1000 Security Device with a Security

Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Installing Advanced License Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Copyright © 2010, Juniper Networks, Inc.

viii

Network and Security Manager Administration Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon EOS 60D Quick Start Manual preview
EOS 60D
Бренд: Canon Страницы: 5
Xtore XN200 series XN-004-A1 User Manual preview
XN200 series XN-004-A1
Бренд: Xtore Страницы: 4
Xtore XN200 series XN-004-A1 Software Manual preview
XN200 series XN-004-A1
Бренд: Xtore Страницы: 7
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Бренд: MACROMEDIA Страницы: 72
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Бренд: F-SECURE Страницы: 20
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Бренд: Blackberry Страницы: 18
TomTom App for Android Reference Manual preview
App for Android
Бренд: TomTom Страницы: 58
Samsung SyncMaster S23A950D User Manual preview
SyncMaster S23A950D
Бренд: Samsung Страницы: 90
Samsung SyncMaster T23A750 E-Manual preview
SyncMaster T23A750
Бренд: Samsung Страницы: 292
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Бренд: Red Hat Страницы: 24
AVG ANTI-VIRUS 9 FREE - REV 90.15 User Manual preview
ANTI-VIRUS 9 FREE - REV 90.15
Бренд: AVG Страницы: 146
Meade Autostar II Instruction Manual preview
Autostar II
Бренд: Meade Страницы: 62
FujiFilm DP Editor Quick Start Manual preview
DP Editor
Бренд: FujiFilm Страницы: 21
FujiFilm BB10768-301(1) Quick Start Manual preview
BB10768-301(1)
Бренд: FujiFilm Страницы: 21
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual preview
3CR15600 - Enterprise Management Suite
Бренд: 3Com Страницы: 218
LEI accessories MAPCREATE 7 Installation And Operation Instructions Manual preview
MAPCREATE 7
Бренд: LEI accessories Страницы: 116
Autodesk AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS Manual preview
AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS
Бренд: Autodesk Страницы: 2
Autodesk AUTOCAD MEP Brochure preview
AUTOCAD MEP
Бренд: Autodesk Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды