Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Скачать руководство пользователя страница 283

Страница: 283 / 1026

In this example, we set the MTU for

fe-0/0/0

to 5120, and create

fe-0/0/1

and

fe-0/0/2

with blank MTU values:

In the Device Manager, select

Devices

Select the device and click the Edit icon.

Select the

Configuration

tab, and then expand

Interfaces

, and select

Interface

List

Click the Add icon and select

fe Physical Interfaces

from the list.

In the Set Slot Range Configuration dialog box, set Slot Range to

, set Pic Range

, Port Range to

0-2

, and click

Three new interfaces populate the interface list.

Select

fe-0/0/0

and click the Edit icon.

Set the Mtu field to

5120

and click

The equivalent Junos configuration syntax for the device object looks like this:

# regular config
interfaces {
fe-0/0/0 { mtu 5k; }
fe-0/0/1 { … }
fe-0/0/2 { … }
}

Apply the template to the device:

Click the

Info

tab of the device, and click

Templates

Click the Edit icon to display the Edit Templates dialog box.

Check the box next to the template you just created and click

to apply the

template to the device.

Check the device object configuration:

Select the Configuration tab.

Expand Interfaces, if necessary, and click Interface List.

fe-0/0/0

has an MTU of 5120, because the regular configuration takes precedence

over both the value in the template and the value in the configuration group.

fe-0/0/1

has an MTU of 4096, because the template value takes precedence over

the value in the configuration group.

fe-0/0/2

has an MTU of 3072 because it was not explicitly defined in the regular

device object configuration or the template. Therefore, it takes the value from the
wildcard setting in the configuration group.

Push the configuration to the device using the Update Device directive:

In the Device Manager, click

Devices

233

Chapter 5: Configuring Devices

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды