manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Using Configuration Groups with Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

Sharing Configuration Group Definitions Across Multiple Devices . . . . . . . . 230

Configuring Clusters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

Configuring Cluster Objects Directly by Editing the Configuration . . . . . . . . 234
Configuring Cluster Objects Using Templates . . . . . . . . . . . . . . . . . . . . . . . . 234
Configuring Global Cluster Data with Configuration Groups (Junos Clusters

Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Configuring Member-Level Data in a Junos Cluster . . . . . . . . . . . . . . . . . . . . 235

Configuring Junos Devices with Redundant Routing Engines . . . . . . . . . . . . . . . 236

Configuring a Routing Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Viewing a Routing Engine Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Overview of VRRP Support in NSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Platforms on Which NSM Supports VRRP . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Activating VRRP on a Device Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Defining a VSI as a VRRP interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Managing Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Viewing and Comparing Configuration File Versions . . . . . . . . . . . . . . . . . . 240
Updating the Device with a Configuration File Version . . . . . . . . . . . . . . . . . 240
Importing or Viewing the Current Version of the Configuration File . . . . . . . 240
Automatic Import of Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Chapter 6

Updating Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

About Updating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

How the Update Process Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
About Atomic Configuration—ScreenOS Devices . . . . . . . . . . . . . . . . . . . . . 245
About Atomic Updating—ScreenOS Devices . . . . . . . . . . . . . . . . . . . . . . . . 246
About Atomic Configuration and Atomic Update—DMI-Compatible

Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

About Implicit Updates (Secure Access and Infranet Controller Devices

Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

Knowing When to Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

Verifying Device Status in Device Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Configuration Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

Verifying Device Status in Device Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Reviewing Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Identifying Administrative Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Reviewing Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Using Preview Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

Running a Configuration Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Using a Delta Configuration Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

Performing an Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256

Retrying a Failed Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Configuring Update Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

Update Options for ScreenOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Update Options for DMI-Compatible Devices . . . . . . . . . . . . . . . . . . . . 258

Tracking Device Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

Reviewing Job Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Device States During Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Copyright © 2010, Juniper Networks, Inc.

xiv

Network and Security Manager Administration Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon Optura Pi Software Starter Manual preview
Optura Pi
Бренд: Canon Страницы: 90
Canon PowerShot G3 Instruction Manual preview
PowerShot G3
Бренд: Canon Страницы: 82
Canon Powershot A650 IS Software User'S Manual preview
Powershot A650 IS
Бренд: Canon Страницы: 49
Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Бренд: Adobe Страницы: 822
ASCOM TEMS VISUALIZATION 7.1 PROFESSIONAL Datasheet preview
TEMS VISUALIZATION 7.1 PROFESSIONAL
Бренд: ASCOM Страницы: 8
ITech IT9000 Installation Instruction preview
IT9000
Бренд: ITech Страницы: 22
Nortel CC MIS User Manual preview
CC MIS
Бренд: Nortel Страницы: 374
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual preview
ExtremeWare 7.0.0
Бренд: Extreme Networks Страницы: 1598
Novell EVOLUTION 2.6 Manual preview
EVOLUTION 2.6
Бренд: Novell Страницы: 126
Brady markware User Manual preview
markware
Бренд: Brady Страницы: 33
FARONICS POWER SAVE Manual preview
POWER SAVE
Бренд: FARONICS Страницы: 80
Mitsubishi Electric DPSClick User Manual preview
DPSClick
Бренд: Mitsubishi Electric Страницы: 92
Mitsubishi Electric DX-PC55E Operation Manual preview
DX-PC55E
Бренд: Mitsubishi Electric Страницы: 51
Mitsubishi Electric DX-PC for View User Manual preview
DX-PC for View
Бренд: Mitsubishi Electric Страницы: 57
Mitsubishi Electric DX-PC10E Instruction Manual preview
DX-PC10E
Бренд: Mitsubishi Electric Страницы: 29
Sharp REACH User Manual preview
REACH
Бренд: Sharp Страницы: 16
Sharp AR-P17 Software setupg guide Software Setup Manual preview
AR-P17 Software setupg guide
Бренд: Sharp Страницы: 22
Sharp Qtopia Desktop Operation Manual preview
Qtopia Desktop
Бренд: Sharp Страницы: 39

Бренды по названию

Популярные бренды

Загрузить еще бренды