manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Understanding Updating Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

Chapter 7

Managing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Managing Device Software Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Upgrading the Device Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Upgrading a Device Software Version from NSM . . . . . . . . . . . . . . . . . 268
Upgrading a Device Software Version outside NSM . . . . . . . . . . . . . . . 268

Adjusting the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Downgrading the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Rolling back the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Deleting the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Upgrading Device Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

Managing License Keys (ScreenOS Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

Installing License Keys on a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Importing License Key Information into NSM . . . . . . . . . . . . . . . . . . . . . . . . . 271
Installing Trial License Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

Viewing and Reconciling Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

Viewing the Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Comparing and Reconciling Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . 273

Managing Large Binary Data Files (Secure Access and Infranet Controller Devices

Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Uploading and Linking Large Binary Data Files . . . . . . . . . . . . . . . . . . . . . . . 276
Importing Custom Sign-In Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278

Creating a Custom Sign-In Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Linking to a Custom Sign-In Page Shared Object . . . . . . . . . . . . . . . . . . 279

Importing Antivirus Live Update Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

Uploading Live Update Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

Linking to a Live Update File Shared Object . . . . . . . . . . . . . . . . . . . . . . 280

Importing Endpoint Security Assessment Plug-in (ESAP) Packages . . . . . 280

Uploading ESAP Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Linking to an ESAP Package Shared Object . . . . . . . . . . . . . . . . . . . . . . 281

Importing Third-Party Host Checker Policies . . . . . . . . . . . . . . . . . . . . . . . . . 281

Uploading a Third-Party Host Checker Policy . . . . . . . . . . . . . . . . . . . . . 281
Linking to a Third-Party Host Checker Policy Shared Object . . . . . . . . . 282

Importing a Secure Virtual Workspace Wallpaper Image (Secure Access

Devices Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Uploading a Secure Virtual Workspace Wallpaper Image . . . . . . . . . . . 282
Linking to a Secure Virtual Workspace Wallpaper Image Shared

Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282

Importing Hosted Java Applets (Secure Access Devices Only) . . . . . . . . . . 283

Uploading a Java Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Linking to a Hosted Java Applet Shared Object . . . . . . . . . . . . . . . . . . . 283

Importing a Custom Citrix Client .cab File (Secure Access Devices Only) . . 284

Uploading a Custom Citrix Client .cab File . . . . . . . . . . . . . . . . . . . . . . . 284
Linking to a Custom Citrix .cab File Shared Object . . . . . . . . . . . . . . . . 284

Backing up and Restoring SA and IC Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

Backing up an SA or IC Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Restoring SA or IC Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

xv

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

NEC AccuSync LCD52V White Paper preview
AccuSync LCD52V
Бренд: NEC Страницы: 5
Benefon TWIG CONFIGURATOR User Manual preview
TWIG CONFIGURATOR
Бренд: Benefon Страницы: 28
FieldServer FS-8700-31 Siemens TIWAY I Driver Driver Manual preview
FS-8700-31 Siemens TIWAY I Driver
Бренд: FieldServer Страницы: 26
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual preview
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
Бренд: Autodesk Страницы: 1638
Baby Lock Ellisimo Gold II Instruction And Reference Manual preview
Ellisimo Gold II
Бренд: Baby Lock Страницы: 50
Palm Phone Link Handbook Handbook preview
Phone Link Handbook
Бренд: Palm Страницы: 22
IBM VIAVOICE 10-ADVANCED EDITION User Manual preview
VIAVOICE 10-ADVANCED EDITION
Бренд: IBM Страницы: 126
FARONICS POWER SAVE - REQUIREMENTS GUIDE Manual preview
POWER SAVE - REQUIREMENTS GUIDE
Бренд: FARONICS Страницы: 17
Canon CanoScan FB620P User Manual preview
CanoScan FB620P
Бренд: Canon Страницы: 36
Yamaha mLAN mLAN Driver Owner'S Manual preview
mLAN mLAN Driver
Бренд: Yamaha Страницы: 16
Cisco TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT - Reference Manual preview
TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT -
Бренд: Cisco Страницы: 26
Epson Stylus pro 3800 portrait edition Specifications preview
Stylus pro 3800 portrait edition
Бренд: Epson Страницы: 12
Epson Stylus Pro 5500 Specifications preview
Stylus Pro 5500
Бренд: Epson Страницы: 2
Epson Stylus Pro 4800 Portrait Edition Brochure & Specs preview
Stylus Pro 4800 Portrait Edition
Бренд: Epson Страницы: 6
Epson Stylus Pro 4800 Portrait Edition Reference Manual preview
Stylus Pro 4800 Portrait Edition
Бренд: Epson Страницы: 396
Epson Stylus Pro 7600 Manual preview
Stylus Pro 7600
Бренд: Epson Страницы: 5
Epson VS330 Quick Reference Manual preview
VS330
Бренд: Epson Страницы: 4
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst User Manual preview
Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst
Бренд: Epson Страницы: 338

Бренды по названию

Популярные бренды

Загрузить еще бренды