Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Скачать руководство пользователя страница 891

Страница: 891 / 1026

G-PDU

A G-PDU is a user data message. It consists of a T-PDU plus a GTP header.

Gateway

Also called a router, a gateway is a program or a special-purpose device that transfers IP

datagrams from one network to another until the final destination is reached.

GBIC

A Gigabit Interface Connector (GBIC) is the kind of interface module card used on some security

devices for connecting to a fiber optic network.

GGSN

Gateway GPRS Support Node.

GI Interface

The interface between a GSN and an external network or the Internet.

Global Domain

A domain is a logical grouping of devices, their policies, and their access privileges. The global

domain is the top level, or root domain, that contains all subdomains.

GMT (Greenwich Mean

Time)

GMT is the Greenwich, England mean solar time. GMT is also known as Universal Time and is

used for calculating time worldwide.

Gn Interface

The interface between two GSNs within the same PLMN.

Gp Interface

The interface between two GSNs located in different PLMNs.

GPRS

General Packet Radio Service. A packet-based technology that enables high-speed wireless

Internet and other data communications. GPRS provides more than three to four times greater

speed than conventional GSM systems. Using a packet data service, subscribers are always

connected and always online so services are easy and quick to access.

Group Expression

Objects

A group expression object represents a statement that sets conditions for authentication

requirements, enabling you to combine multiple external user objects. You can create group

expressions using the operator OR, AND, or NOT to combine user objects, user group objects,

or other group expressions.

Groups

A group organizes previously-created devices into user-defined groups that make it easier for

you to configure and manage devices in your domain. Groups enable you to execute certain

NSM operations on multiple security devices at the same time.

GRX

GPRS Roaming Exchange.

GSM

Global System for Mobile Communications.

GTP

GPRS Tunneling Protocol.

841

Appendix A: Glossary

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды