Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Страница: 205 / 1026

Right-click the cluster icon in the Device Manager, select New > Cluster Member , and
follow the instructions in the Add Cluster Member wizard. When prompted, select
Device Is Not Reachable to add an existing device with a dynamic IP address.
The last step in adding the cluster member prompts you to continue adding cluster
members. Select this option if you have more members to add; unselect it if you are
done adding members.
4.
On each cluster member device, configure and activate the NSM agent and establish
an SSH session with NSM.
5.
Import the cluster.
In the Device Manager, open the cluster icon, right-click on one cluster member and
select
Import Device from the list. You do this only once and for the entire cluster
because the configuration is identical for all cluster members.
After importing, the configuration appears at the cluster level in NSM. To edit the
configuration, open the cluster icon, not the individual cluster members.
Because Secure Access and Infranet Controller configurations can be large, some large
binary data files are not imported with the rest of the configuration. A stub is placed in
the device configuration tree instead. If you need to manage these files in NSM, you must
import them later as shared objects, and then create links to those shared objects from
the device configuration tree. See “Managing Large Binary Data Files (Secure Access and
Infranet Controller Devices Only)” on page 275 for details.
Adding and Importing a Secure Access or Infranet Controller Cluster through
Reachable Workflow
To add a cluster member:
1.
From the left pane of the NSM UI, click Configure .
2.
Expand Device Manager and select Devices . The Devices workspace appears on the
right side of the screen.
3.
Click the Device Tree tab, and select the cluster to which you want to add the members.
4.
Click the New button and select Cluster Member . The New–Cluster Member dialog
box appears.
5.
Enter the cluster member name, select Device Is Reachable and click Next .
6.
Specify the device connection settings:
•
IP Address —IP address of the device.
•
Admin User Name —Administrator user name created for the device.
•
Password —Administrator password created for the device.
NOTE: The ssh port number for cluster member is 22 by default and the
port number cannot be modified.
155 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Adding Devices