manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

main display area....................................................................25
managed devices.....................................................................13
management connection, modifying............................195
menu bar....................................................................................25
merging security policies....................................................518
meshing, disabling in VPN Manager..............................574
Microsoft Remote Procedure Call (MS-RPC)...........389
MIPs

global objects................................................................416
using in rules.................................................................450

Mobile Country Code (MCC)...........................................385
Mobile Network Code (MNC)..........................................385
Mobile Subscriber Identification Number

(MSIN).................................................................................385

mode, extended port...................................................115, 120
modules, NSM..........................................................................25
monitoring

NSRP statistics............................................................693
VPN Status....................................................................690

multicast rulebase

about................................................................................442
permissions......................................................................82

multicast rules

configuring.....................................................................466
deleting.............................................................................517
disabling...........................................................................517

MX Series devices

activating with dynamic IP address......................136
activating with static IP address............................134
adding multiple with discovery rules....................168
configuring.......................................................................197
configuring dual Routing Engines.........................236
importing with dynamic IP address.......................125
importing with static IP address..............................116
supported Ethernet Services routers......................18

My reports................................................................................810

N

naming convention................................................................56
NAT objects

about.................................................................................414
configuring in firewall rules......................................454
destination NAT............................................................416
DIP, global.......................................................................415
in VPNs............................................................................563
Junos OS..........................................................................417
MIP, global......................................................................416
VIP, global.......................................................................416

NAT Traversal..........................................................................577

navigation tree.........................................................................24
negating source or destination in firewall

rules......................................................................................450

NetScreen Redundancy Protocol

See

NSRP

network honeypot rules

configuring services....................................................507

NetworkProfiler view............................................................718
NHTB, configuring in VPN Manager...............................573
ns-profile................................................................................460
NSM API......................................................................................10
NSM architecture

Abstract Data Model.................................................308
Data Model....................................................................308
device capabilities......................................................308
Device Server....................................................................12
distributed data collection..........................................21
GUI Server...........................................................................11
managed devices............................................................13
management system.....................................................11
overview.............................................................................10
UI............................................................................................11

NSM modules

Action Manager................................................................31
Audit Log Viewer.............................................................27
Device Manager...............................................................27
Job Manager.................................................................9, 31
Log Investigator..............................................................26
Log Viewer........................................................................25
Object Manager..............................................................29
overview.............................................................................25
Policy Manager...............................................................28
Realtime Monitor............................................................26
Report Manager..............................................................26
Security Monitor..............................................................27
Server Manager................................................................31
VPN Manager..................................................................29

NSM UI

about...................................................................................24
Administer panel.............................................................31
Configure panel...............................................................27
Investigate panel............................................................25
main display area...........................................................25
menu bar...........................................................................25
navigation tree.................................................................24
status bar..........................................................................25
toolbar................................................................................25

NSRP

NSRP Monitor...............................................................693
statistics monitoring..................................................693

Copyright © 2010, Juniper Networks, Inc.

968

Network and Security Manager Administration Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Acer AO533 Driver Installation preview
AO533
Бренд: Acer Страницы: 4
F-SECURE PSB Administrator'S Manual preview
PSB
Бренд: F-SECURE Страницы: 43
Samsung SL-M2820DW Driver Manual preview
SL-M2820DW
Бренд: Samsung Страницы: 16
Samsung SCX 4826FN - Laser Multi-Function Printer Brukerhåndbok preview
SCX 4826FN - Laser Multi-Function Printer
Бренд: Samsung Страницы: 16
3Com NBX 100 Software Upgrade Instructions preview
NBX 100
Бренд: 3Com Страницы: 4
Samsung HXDU010EB - Story Station 1 TB External Hard... User Manual preview
HXDU010EB - Story Station 1 TB External Hard...
Бренд: Samsung Страницы: 7
JETWAY MAGICTWINXP-R10 Software Install Manual preview
MAGICTWINXP-R10
Бренд: JETWAY Страницы: 43
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Бренд: Alphasmart Страницы: 4
National Instruments PID Control Toolkit 371685C-01 User Manual preview
PID Control Toolkit 371685C-01
Бренд: National Instruments Страницы: 39
FARONICS INSIGHT - Manual preview
INSIGHT -
Бренд: FARONICS Страницы: 43
Mustek 1200 CP User Manual preview
1200 CP
Бренд: Mustek Страницы: 28
M-Audio Jamlab User Manual preview
Jamlab
Бренд: M-Audio Страницы: 15
SAP DB:ODBC Manual preview
DB:ODBC
Бренд: SAP Страницы: 31
KapLogic Aegis2.2x Installation Manual preview
Aegis2.2x
Бренд: KapLogic Страницы: 24
Waves MultiRack SoundGrid V9.7 Troubleshooting Manual preview
MultiRack SoundGrid V9.7
Бренд: Waves Страницы: 39
Xerox FREEFLOW 701P47393 User Manual preview
FREEFLOW 701P47393
Бренд: Xerox Страницы: 32
Omega Engineering M-4066 User Manual preview
M-4066
Бренд: Omega Engineering Страницы: 63
Harman Kardon SIGNATURE 2.0 Instruction & Operation Manual preview
SIGNATURE 2.0
Бренд: Harman Kardon Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды