manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Example: Configuring Role-Based Administration . . . . . . . . . . . . . . . . . . . . . . 91

Step 1: Create the Subdomains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Step 2: Create the Subdomain Administrator . . . . . . . . . . . . . . . . . . . . . . 92
Step 3: Create the Viewing and Reporting Administrator . . . . . . . . . . . . . 92
Step 4: Verify Administrator Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Part 2

Integrating

Chapter 4

Adding Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

About Device Creation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Determine Device Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Verifying Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Managing the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Before You Begin Adding Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Importing Versus Modeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Importing Device Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Modeling Device Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Device Add Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Selecting the Domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Adding Single or Multiple Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Specifying the OS and Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Determining Port Mode (ScreenOS Devices Only) . . . . . . . . . . . . . . . . . . . . 104

Trust-Untrust Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Home-Work Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Dual-Untrust Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Combined Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Trust-Untrust-DMZ Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Trust/Untrust/DMZ (Extended) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 108
DMZ-Dual-Untrust Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Port Mode Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Changing the Port Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Supported Add Device Workflows by Device Family . . . . . . . . . . . . . . . . . . . . . . . . 111
Importing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Adding and Importing Devices with Static IP Addresses . . . . . . . . . . . . . . . . 113

ScreenOS Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
IDP Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Junos Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
SA and IC Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Adding Devices with Dynamic IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . 118

ScreenOS Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
IDP Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Adding and Importing an Infranet Controller or Secure Access

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Adding and Importing a Junos Device with a Dynamic IP Address . . . . . 125

Verifying Imported Device Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Using Device Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Using Device Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Using Job Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Copyright © 2010, Juniper Networks, Inc.

x

Network and Security Manager Administration Guide

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Patton electronics ForeSight 6300 NMS Getting Started Manual preview
ForeSight 6300 NMS
Бренд: Patton electronics Страницы: 117
Xante PlateRunner P24 Processor Supplementary Manual preview
PlateRunner P24 Processor
Бренд: Xante Страницы: 6
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Бренд: SMART Страницы: 20
Minolta DIMAGE VIEWER 2.1 Instruction Manual preview
DIMAGE VIEWER 2.1
Бренд: Minolta Страницы: 84
Red Hat CERTIFICATE 8.0 RELEASE NOTES Release Note preview
CERTIFICATE 8.0 RELEASE NOTES
Бренд: Red Hat Страницы: 34
Promise Technology PAM User Manual preview
PAM
Бренд: Promise Technology Страницы: 84
Measurement Computing 374318A-01 User Manual preview
374318A-01
Бренд: Measurement Computing Страницы: 109
Hollow Sun Vox Continental Instructions Manual preview
Vox Continental
Бренд: Hollow Sun Страницы: 9
Red Hat NETWORK 4.1.0 - Manual preview
NETWORK 4.1.0 -
Бренд: Red Hat Страницы: 40
UNIBLUE SPEEDUPMYPC Quick Start Manual preview
SPEEDUPMYPC
Бренд: UNIBLUE Страницы: 3
Bay Networks MicroManager Installation Manual preview
MicroManager
Бренд: Bay Networks Страницы: 15
Autodesk 15606-011408-9008 - MAPGUIDE R6.3 NAMED-100U PK User Manual preview
15606-011408-9008 - MAPGUIDE R6.3 NAMED-100U PK
Бренд: Autodesk Страницы: 204
Autodesk ALIAS SURFACE Brochure preview
ALIAS SURFACE
Бренд: Autodesk Страницы: 10
McAfee VIRUSSCAN 5.1 User Manual preview
VIRUSSCAN 5.1
Бренд: McAfee Страницы: 315
FARONICS DEEP FREEZE - SMS INTEGRATION 8-2006 Manual preview
DEEP FREEZE - SMS INTEGRATION 8-2006
Бренд: FARONICS Страницы: 10
LXE 1280 Reference Manual preview
1280
Бренд: LXE Страницы: 260
Navman S-Series NavDesk 2009 User Manual preview
S-Series NavDesk 2009
Бренд: Navman Страницы: 36
Samsung ML 2851ND - B/W Laser Printer Manual preview
ML 2851ND - B/W Laser Printer
Бренд: Samsung Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды