manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Updating Attack Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Adding Objects (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Configuring a Security Policy for IDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Reviewing IDP Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Maintaining IDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Creating IDP-Only Administrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Simplifying Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Using Device Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using Device Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using Configuration Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Merging Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using a Naming Convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Example: Using a Naming Convention for Devices . . . . . . . . . . . . . . . . . . 57
Example: Using a Naming Convention for Address Objects . . . . . . . . . . . 57

Creating an Information Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Adding an Information Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Modifying an Information Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Deleting an Information Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 3

Configuring Role-Based Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Role-Based Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
About Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Using Role-Based Administration Effectively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Enterprise Organizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Geographical Divisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
NOC and SOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Administrator Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Service Providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Internal Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Managed Security Service Provider (MSSP) . . . . . . . . . . . . . . . . . . . . . . 66

Configuring Role-Based Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Creating Administrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Configuring General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Configuring Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
RADIUS Authentication and Authorization . . . . . . . . . . . . . . . . . . . . . . . 68
Configuring Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Creating Custom Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Roles and Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Permissions Changes in Release 2008.1 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Permissions Changes in Release 2006.1 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Permissions Changes in Release 2005.3 . . . . . . . . . . . . . . . . . . . . . . . . . 88

Assigning and Viewing Custom Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Configuring a User Activity in a Custom Role . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Viewing Logged Administrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Forcing an Administrator to Log Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Creating Subdomains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Viewing Current Domain Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

ix

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Yamaha Add-On Effects Owner'S Manual preview
Add-On Effects
Бренд: Yamaha Страницы: 5
Omron CX-SUPERVISOR V3 Brochure preview
CX-SUPERVISOR V3
Бренд: Omron Страницы: 5
MACROMEDIA CONTRIBUTE 3 - USING AND ADMINISTERING... Use Manual preview
CONTRIBUTE 3 - USING AND ADMINISTERING...
Бренд: MACROMEDIA Страницы: 256
Ricoh Caplio Utility for Macintosh Operation Manual preview
Caplio Utility for Macintosh
Бренд: Ricoh Страницы: 19
Crestron SIMPL Windows Installation & Operating Manual preview
SIMPL Windows
Бренд: Crestron Страницы: 230
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Бренд: Novell Страницы: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Бренд: Novell Страницы: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Бренд: Novell Страницы: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Бренд: Novell Страницы: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Бренд: Novell Страницы: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Бренд: Novell Страницы: 7
Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual preview
LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS
Бренд: Novell Страницы: 93
Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual preview
OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX
Бренд: Novell Страницы: 254
Novell LINUX ENTERPRISE DESKTOP 10 Quick Manual preview
LINUX ENTERPRISE DESKTOP 10
Бренд: Novell Страницы: 9
Novell IFOLDER 3.6 - SECURITY ADMINISTRATION Manual preview
IFOLDER 3.6 - SECURITY ADMINISTRATION
Бренд: Novell Страницы: 22
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual preview
LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009
Бренд: Novell Страницы: 236
Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION Manual preview
GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION
Бренд: Novell Страницы: 75
Elgato EyeTV Hybrid Hardware Reference Manual preview
EyeTV Hybrid
Бренд: Elgato Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды