Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Страница: 279 / 1026

To revert to the configuration group value for a specific field, right-click on the field, and
select
Revert to template/default value .
NOTE: Nonwildcard list entries derived from configuration groups cannot be
deleted in the device object.
Deleting a Configuration Group
When you delete a configuration group, all applied and excluded data is removed from
the configuration.
To delete a configuration group, follow these steps:
1.
In the Device Manager, open the device in which you want to delete a configuration
group and select
Config Group List from the device configuration tree.
2.
Select the configuration group you want to delete and click the Delete icon.
The configuration group is deleted.
Adding Ordered List Entries Using Configuration Groups
List entries added by configuration groups into ordered lists in the device object appear
in a specific order determined by Junos convention. By default, entries from templates
appear first, followed by regular configuration data, followed by entries created by the
configuration groups in the order in which the configuration groups are applied.
Consider two configuration groups J and K:
•
Configuration group J contains the following list items in the stated order:
c
a
b
•
Configuration group K contains the following list items in the stated order:
r
a
z
•
The device object already has the following list items configured in the stated order:
x
z
After applying groups J and K, the entries appear in the following order in the device
configuration:
x # from the regular configuration
z # merger of data from regular configuration and configuration group K
(regular configuration takes precedence)
c # from configuration group J
a # merger of data from configuration groups J and K (J takes precedence)
229 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Configuring Devices