Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1 Скачать руководство пользователя страница 839

Страница: 839 / 1026

Figure 114: Audit Log Viewer UI Overview

NOTE:

Summaries appear in the Target Name or Device Name tables only

for logs with targets or devices.

Audit Log Table

The audit log table contains the columns of information shown in Table 108 on page 789.

Table 108: Audit Log Information

Description

Column

The time the object was changed. The Audit Log Viewer displays log entries in order of time generated
by Greenwich Mean Time (GMT).

Time Generated

The name of the NSM administrator who changed the object.

Admin Name

The name of the domain (global or subdomain) that contains the changed object.

Admin Login Domain

The domains from which a user is allowed to view audit logs. The values are:

•

empty

— Audit-log entries created prior to this NSM release that do not have targeted objects or

devices. These logs can be viewed by all NSM users.

•

Subdomain

— Audit-log entries for all managed devices associated with a subdomain. Users of

the subdomain or global domain can view these audit-log entries.

•

SYSTEM

— Audit-log entries generated by the system. These audit-log entries can be viewed by

all NSM users.

•

global

— Audit-log entries from the global domain. Users of the global domain can view all audit-log

entries.

Working Domain

The command applied to the object or system, for example,

sys_logout

modify

Command

The final access-control status of activities is either success or failure.

Authorization Status

789

Chapter 19: Logging

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Бренды по названию

Популярные бренды