manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Configuring Exempt Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491

Adding the Exempt Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492

Configuring Source and Destination Zones . . . . . . . . . . . . . . . . . . . . . . 492
Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 492

Setting Attack Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Creating an Exempt Rule from the Log Viewer . . . . . . . . . . . . . . . . . . . . . . . 493

Configuring Backdoor Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494

Adding the Backdoor Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495

Configuring Source and Destination Zones . . . . . . . . . . . . . . . . . . . . . . 495
Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 495
Configuring Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496

Setting Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
Setting Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496
Setting Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496

Setting Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Setting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Logging Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497

Setting Severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

Configuring SYN Protector Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

The TCP Handshake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

SYN-Floods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498

Adding the SYN Protector Rulebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499
Defining a Match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499

Configuring Source and Destination Address Objects . . . . . . . . . . . . . . 499
Configuring Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500

Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
Setting Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500

Setting Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Setting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Logging Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501

Setting Severity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
Specifying VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Setting Target Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Entering Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Configuring Traffic Anomalies Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Detecting TCP and UDP Port Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502
Detecting Other Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Example: Traffic Anomalies Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Session Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503

xxiii

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Бренд: Canon Страницы: 124
Samsung HMX-U10RN Software Administration Manual preview
HMX-U10RN
Бренд: Samsung Страницы: 11
Crestron CRESTRON-APP-SSTV Operations & Installation Manual preview
CRESTRON-APP-SSTV
Бренд: Crestron Страницы: 28
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Бренд: Sony Ericsson Страницы: 10
Teklynx Form Designer User Manual preview
Form Designer
Бренд: Teklynx Страницы: 30
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual preview
ExtremeWare 7.0.0
Бренд: Extreme Networks Страницы: 1598
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Бренд: Sybase Страницы: 70
ACRONIS DISK DIRECTOR SUITE 10 User Manual preview
DISK DIRECTOR SUITE 10
Бренд: ACRONIS Страницы: 127
Accordiva SecuExpress User Manual preview
SecuExpress
Бренд: Accordiva Страницы: 31
Altigen AltiContact Manager Version 5.0 Administration Manual preview
AltiContact Manager Version 5.0
Бренд: Altigen Страницы: 542
Siemens IEEE802.11 Tutorial preview
IEEE802.11
Бренд: Siemens Страницы: 84
Juniper BXOS 4.1 R2 Release Note preview
BXOS 4.1 R2
Бренд: Juniper Страницы: 24
Juniper JUNOS OS 10.3 - SOFTWARE Manual preview
JUNOS OS 10.3 - SOFTWARE
Бренд: Juniper Страницы: 3946
Ulead BURN.NOW 4.5 User Manual preview
BURN.NOW 4.5
Бренд: Ulead Страницы: 60
Red Hat APPLICATION STACK 1.1 RELEASE Release Note preview
APPLICATION STACK 1.1 RELEASE
Бренд: Red Hat Страницы: 30
Waves Trans-X User Manual preview
Trans-X
Бренд: Waves Страницы: 8
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Бренд: Juniper Страницы: 14
Nikon Capture 3 Install Manual preview
Capture 3
Бренд: Nikon Страницы: 119

Бренды по названию

Популярные бренды

Загрузить еще бренды