manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Административное руководство Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 предоставляет подробные инструкции по управлению и обеспечению безопасности сети. Скачайте это руководство бесплатно с manualshive.com и получите необходимую информацию для эффективной работы с продуктом.

Поделиться
Скачать
background image

Using Configuration Summaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Modeling Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Modeling a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Creating a Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Activating a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Devices with Static IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Devices with Dynamic IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Using Rapid Deployment (ScreenOS Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Creating the Configlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Installing the Configlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Preparing the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Installing the Configlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Updating the Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Summarize Delta Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Example: User Successfully Selects and Updates Two Devices with

Delta Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Example: User Selects Two Devices with Delta Option and One Device

Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Example: User Selects Two Devices to Update Without the Delta

Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Example: User Selects Two Devices to Update with the Delta Option,

But Has no Admin Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Adding Vsys Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Placing the Root Device in a Global Domain or a Subdomain . . . . . . . . . . . . 147
Importing Vsys Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Modeling Vsys Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Adding L2V Root Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Adding an Extranet Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Adding Clusters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Adding a Cluster Device Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Adding Members to the Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Adding ScreenOS or IDP Clusters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Adding Secure Access or Infranet Controller Clusters . . . . . . . . . . . . . . . . . . 153

Adding and Importing a Secure Access or Infranet Controller Cluster

through Unreachable Workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Adding and Importing a Secure Access or Infranet Controller Cluster

through Reachable Workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Adding Clusters of Routers Running Junos OS . . . . . . . . . . . . . . . . . . . . . . . . 156

Adding and Importing a Junos Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Adding a Junos Cluster with Modeled Cluster Members . . . . . . . . . . . . . 157
Activating and Updating a Modeled Junos Cluster . . . . . . . . . . . . . . . . . 158

Example: Adding and Importing a Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Adding the Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Adding the Cluster Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Importing the Cluster configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

xi

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Содержание NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

MACROMEDIA BREEZE 5 Integration Manual preview
BREEZE 5
Бренд: MACROMEDIA Страницы: 232
Symantec PCANYWHERE - V12.1 User Manual preview
PCANYWHERE - V12.1
Бренд: Symantec Страницы: 321
Lowrance 6.2 Installation And Operation Instructions Manual preview
6.2
Бренд: Lowrance Страницы: 80
Lowrance 6.3 Installation And Operation Instructions Manual preview
6.3
Бренд: Lowrance Страницы: 108
Focusrite Plug-in Suite User Manual preview
Plug-in Suite
Бренд: Focusrite Страницы: 9
RADVision OnLAN User Manual preview
OnLAN
Бренд: RADVision Страницы: 12
Belkin n52te - Nostromo SpeedPad Game Pad User Manual preview
n52te - Nostromo SpeedPad Game Pad
Бренд: Belkin Страницы: 21
AVYCON Control4 Manual preview
Control4
Бренд: AVYCON Страницы: 16
Red Hat GLOBAL FILE SYSTEM 4.5 Manual preview
GLOBAL FILE SYSTEM 4.5
Бренд: Red Hat Страницы: 62
Lenovo ThinkCentre A55 Hardware Maintenance Manual preview
ThinkCentre A55
Бренд: Lenovo Страницы: 210
Lenovo ThinkCentre A57 Hardware Maintenance Manual preview
ThinkCentre A57
Бренд: Lenovo Страницы: 788
Lenovo ThinkCentre A57 Brochure preview
ThinkCentre A57
Бренд: Lenovo Страницы: 4
Sony MZ-M100 Operating Instructions Manual preview
MZ-M100
Бренд: Sony Страницы: 119
Sony MZ-M10 Brochure & Specs preview
MZ-M10
Бренд: Sony Страницы: 4
Sony PEGA-GC10 Instruction Manual preview
PEGA-GC10
Бренд: Sony Страницы: 1
Adaptec 1684800 - EZ-SCSI Deluxe User Manual preview
1684800 - EZ-SCSI Deluxe
Бренд: Adaptec Страницы: 9
Adaptec CDP-00278-01-A User Manual preview
CDP-00278-01-A
Бренд: Adaptec Страницы: 130
Generic Media gMovie 1.3 Operating Instructions Manual preview
gMovie 1.3
Бренд: Generic Media Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды