Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Руководство администратора

Страница: 380 / 1026

NOTE: Address object group names must be unique; you cannot give an
address object group the same name as an existing address object.
4.
Select a color to represent the group.
5.
Enter a comment about the group.
6.
Select the IP version. The member list is populated with a particular IP version, based
on your choice. Each address group is exclusive to the selected IP version. You can
only add IPv4 addresses to an IPv4 address group; similarly, you can only add IPv6
addresses to an IPv6 address group.
7.
In the Non-members list, select the address objects you want to add to the group
(hold Ctrl to select multiple objects), then click
Add . The selected address objects
now appear in the member list.
•
If you are in the global domain, only the global address objects appear in the
Non-members list.
• If you are in a subdomain, both global and subdomain address objects appear in
the Non-members list.
NOTE: You can drag address objects into and out of address groups from
the main address tree.
8.
Click OK to add the group.
You can create address object groups with existing users or create empty address object
groups and fill them with users later.
Adding a Multicast Group Address Object
To add a multicast group address object:
1.
In the navigation tree, select Address Objects . The address object tree appears.
2.
In the main display area, click the Add icon and select Multicast Group . The New
Multicast Group dialog box appears.
3.
Enter a name for the multicast group address.
NOTE: Multicast Group address object names must be unique; you cannot
assign the same name to another existing multicast group address object.
4.
Select a color to represent the multicast group address.
5.
Enter a comment about the multicast group address.
6.
Select an IP version: IPv4 or IPv6.
Copyright © 2010, Juniper Networks, Inc. 330
Network and Security Manager Administration Guide