Jungheinrich ETR 314, Руководство по эксплуатации

Страница: 71 / 261

0
608
.USA
E 40
3.10 Picking up, lifting, and transporting load units
– Bring fork tines horizontal.
– Drive up to the load unit
Shift fork carrier forward.
– Raise tines to the correct height.
– Drive the tines under the load unit.
– Lift up the load unit.
– Retract fork carrier.
Q wW
Transport runs with and without
a load should be made only with
the fork carrier retracted and
tilted backward and the load
pick-up lowered.
– Lower the load unit into the transport position.
– Tilt the load unit backwards.
– Transport the load unit.
– Bring the load unit into the horizontal position.
– Bring load unit to the correct height.
– Set down the load unit.
– Retract pantograph.
3.11 Switching off and securing the vehicle
When the vehicle is left, even for a short time, it must be switched off and secured.
Q wW
Do not park the vehicle on a slope. The load carrier must always be lowered
completely.
– Use the brake key (26) to engage the
parking brake.
– Lower the load carrier completely and
make sure it is horizontal.
– Completely retract fork carrier.
– Press the EMERGENCY OFF (13)
switch to the "Off" position.
– Switch the switch latch (4) into the "0"
position, remove the key or for code lock
press the
o
key.
V
R
25
24
H
S
U
T
26 4 13
0
608
.USA
E 40
3.10 Picking up, lifting, and transporting load units
– Bring fork tines horizontal.
– Drive up to the load unit
Shift fork carrier forward.
– Raise tines to the correct height.
– Drive the tines under the load unit.
– Lift up the load unit.
– Retract fork carrier.
Q wW
Transport runs with and without
a load should be made only with
the fork carrier retracted and
tilted backward and the load
pick-up lowered.
– Lower the load unit into the transport position.
– Tilt the load unit backwards.
– Transport the load unit.
– Bring the load unit into the horizontal position.
– Bring load unit to the correct height.
– Set down the load unit.
– Retract pantograph.
3.11 Switching off and securing the vehicle
When the vehicle is left, even for a short time, it must be switched off and secured.
Q wW
Do not park the vehicle on a slope. The load carrier must always be lowered
completely.
– Use the brake key (26) to engage the
parking brake.
– Lower the load carrier completely and
make sure it is horizontal.
– Completely retract fork carrier.
– Press the EMERGENCY OFF (13)
switch to the "Off" position.
– Switch the switch latch (4) into the "0"
position, remove the key or for code lock
press the
o
key.
V
R
25
24
H
S
U
T
26 4 13