Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 26 / 81

D 5
0406
.GB
6 Battery discharge indicator (
t
)
After the truck has been released via the key switch
or CANCODE, the battery charge status is
displayed.
The colours of the LEDs (9) represent the following conditions:
Z
If the LED is red, load units can no longer be lifted. Lifting is only released when the
battery connected is at least 70 % charged.
If the charge status calculated when the truck is switched on is at least 70 % of that
of a fully charged battery, the display is reset to 100 %. The display reduces in
increments of 10 % depending on the charge status. The displayed status is reduced
to a maximum of 10 % within 3 minutes.
The displayed status cannot rise again during the present operation.
The status display is reset to 100 % when the battery type is adjusted.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a fault code of the truck controller.
The flashing sequence indicates the type of fault.
LED colour Value
Green Standard battery residual capacity 40 - 100 %
Maintenance free battery residual capacity 60 - 100 %
Orange Standard battery residual capacity 30 - 40 %
Maintenance free battery residual capacity 50 - 60 %
Green/orange
flashing 1Hz
Standard battery residual capacity 20 - 30 %
Maintenance free battery residual capacity 40 - 50 %
Red Standard battery residual capacity 0 - 20 %
Maintenance free battery residual capacity 0 - 40 %
9
D 5
0406
.GB
6 Battery discharge indicator (
t
)
After the truck has been released via the key switch
or CANCODE, the battery charge status is
displayed.
The colours of the LEDs (9) represent the following conditions:
Z
If the LED is red, load units can no longer be lifted. Lifting is only released when the
battery connected is at least 70 % charged.
If the charge status calculated when the truck is switched on is at least 70 % of that
of a fully charged battery, the display is reset to 100 %. The display reduces in
increments of 10 % depending on the charge status. The displayed status is reduced
to a maximum of 10 % within 3 minutes.
The displayed status cannot rise again during the present operation.
The status display is reset to 100 % when the battery type is adjusted.
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a fault code of the truck controller.
The flashing sequence indicates the type of fault.
LED colour Value
Green Standard battery residual capacity 40 - 100 %
Maintenance free battery residual capacity 60 - 100 %
Orange Standard battery residual capacity 30 - 40 %
Maintenance free battery residual capacity 50 - 60 %
Green/orange
flashing 1Hz
Standard battery residual capacity 20 - 30 %
Maintenance free battery residual capacity 40 - 50 %
Red Standard battery residual capacity 0 - 20 %
Maintenance free battery residual capacity 0 - 40 %
9