Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 29 / 81

0406
.GB
E 2
2 Controls and indicators
Item Control / display Function
1 Front panel
t
The complete hydraulics and control electronics
are located behind the front panel.
2 Tiller
t
Important control elements are located in the tiller
arm.
3 Brake button
t
The truck brakes at the maximum rate until it
comes to a halt.
4 Controller
t
Controls travel direction and speed
(see Section 4.2)
5 Tiller
t
Moving tiller;
Steering and braking:
Set to brake zone (B) (see page E9):
Truck is braked mechanically.
Set to travel zone (F) (see page E9):
The mechanical brake is released and the truck
is ready for operation.
6 Warning signal (horn) button
t
Sets off the warning signal.
7 “Lower” button
t
Lowers the load forks.
8 “Lift” button
t
Raises the load forks.
9 Battery discharge indicator
t
Battery charge status.
10 Display instrument (CANDIS)
o
Hourmeter display
Displays battery capacity.
Shows the battery residual capacity and the
operating hours completed by the truck
11 Key switch
t
Switches control current on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
12 CANCODE keypad
o
Code settings
Travel program release
13 Battery connector
(Emergency Disconnect)
t
Pulling the battery connector interrupts the supply
current and deactivates all electrical functions,
causing the truck to brake automatically.
14 Pressure sensitive mat
(all functions released when
occupied)
t
– Pressure sensitive mat occupied:
Travel and all functions released.
– Pressure sensitive mat unoccupied:
The truck coasts.
t
= Standard equipment
o
= Optional equipment
0406
.GB
E 2
2 Controls and indicators
Item Control / display Function
1 Front panel
t
The complete hydraulics and control electronics
are located behind the front panel.
2 Tiller
t
Important control elements are located in the tiller
arm.
3 Brake button
t
The truck brakes at the maximum rate until it
comes to a halt.
4 Controller
t
Controls travel direction and speed
(see Section 4.2)
5 Tiller
t
Moving tiller;
Steering and braking:
Set to brake zone (B) (see page E9):
Truck is braked mechanically.
Set to travel zone (F) (see page E9):
The mechanical brake is released and the truck
is ready for operation.
6 Warning signal (horn) button
t
Sets off the warning signal.
7 “Lower” button
t
Lowers the load forks.
8 “Lift” button
t
Raises the load forks.
9 Battery discharge indicator
t
Battery charge status.
10 Display instrument (CANDIS)
o
Hourmeter display
Displays battery capacity.
Shows the battery residual capacity and the
operating hours completed by the truck
11 Key switch
t
Switches control current on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
12 CANCODE keypad
o
Code settings
Travel program release
13 Battery connector
(Emergency Disconnect)
t
Pulling the battery connector interrupts the supply
current and deactivates all electrical functions,
causing the truck to brake automatically.
14 Pressure sensitive mat
(all functions released when
occupied)
t
– Pressure sensitive mat occupied:
Travel and all functions released.
– Pressure sensitive mat unoccupied:
The truck coasts.
t
= Standard equipment
o
= Optional equipment