Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 35 / 81

0406
.GB
E 8
Steering
F
In narrow bends the driver extends beyond the geometry of the truck.
– Move the tiller (5) to the left or right.
Brakes
F
The braking characteristics of the truck depends largely on the track conditions.
The driver must allow for these when operating the truck.
The truck can be braked in two different ways:
– by plugging
– by using the service brake
Braking by plugging (counter current):
– When travelling, set the controller (4) to the opposite direction.
The truck brakes regeneratively until it starts to move in the opposite direction.
Z
The brake force depends on the position of the controller.
Braking with the service brake:
– Set the tiller (5) to one of the brake zones (B).
The drive motor brakes regeneratively (motor brake).
When the truck is idle the magnetic brake applies.
Z
When the tiller is released it reverts to the upper braking zone (B).
0406
.GB
E 8
Steering
F
In narrow bends the driver extends beyond the geometry of the truck.
– Move the tiller (5) to the left or right.
Brakes
F
The braking characteristics of the truck depends largely on the track conditions.
The driver must allow for these when operating the truck.
The truck can be braked in two different ways:
– by plugging
– by using the service brake
Braking by plugging (counter current):
– When travelling, set the controller (4) to the opposite direction.
The truck brakes regeneratively until it starts to move in the opposite direction.
Z
The brake force depends on the position of the controller.
Braking with the service brake:
– Set the tiller (5) to one of the brake zones (B).
The drive motor brakes regeneratively (motor brake).
When the truck is idle the magnetic brake applies.
Z
When the tiller is released it reverts to the upper braking zone (B).