Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 42 / 81

E 15
0406
.GB
Setting procedure for trucks with and without display instrument (CANDIS (
o
)):
– Enter the three-digit parameter number and confirm with Set key (17).
– The display instrument (CANDIS (
o
)) continues to display the operating hours.
If the display changes, cancel the setting with the
o
key (21) and restart from
the beginning.
– Enter a value according to the parameter list, or change it and confirm with
the Set key (17).
Z
If the entry is incorrect, the LED (16) on the
o
key (21) flashes red. If you enter
the parameter number again the setting can be entered or changed.
To enter more parameters, repeat the procedure. To complete the setting, press
the
o
key (21).
The following parameters can be entered.
Code lock parameter list
No. Function Range
Setting value
Standard
Setting
value
Comments
Procedure
Code lock
000 Changing the master
code
The length (4-6 digits) of
the master code also pre-
determines the length of
the operator code (4-6
digits). Provided the
operator codes are
programmed, only news
codes of the same length
can be entered. If the
code length is to be
changed, all operator
codes must first be
deleted.
0000 - 9999
or
00000 - 99999
or
000000 - 999999
7295 (LED 18 flashes)
Enter the
current code
Confirm (Set)
(LED 19 flashes)
Enter a new code
Confirm (Set)
(LED 20 flashes)
Repeat the new
code
Confirm (Set)
001 Adding an operator code
(max. 600)
0000 - 9999
or
00000 - 99999
or
000000 - 999999
2580 (LED 19 flashes)
Enter a code
Confirm (Set)
(LED 20 flashes)
Repeat the
code entry
Confirm (Set)
E 15
0406
.GB
Setting procedure for trucks with and without display instrument (CANDIS (
o
)):
– Enter the three-digit parameter number and confirm with Set key (17).
– The display instrument (CANDIS (
o
)) continues to display the operating hours.
If the display changes, cancel the setting with the
o
key (21) and restart from
the beginning.
– Enter a value according to the parameter list, or change it and confirm with
the Set key (17).
Z
If the entry is incorrect, the LED (16) on the
o
key (21) flashes red. If you enter
the parameter number again the setting can be entered or changed.
To enter more parameters, repeat the procedure. To complete the setting, press
the
o
key (21).
The following parameters can be entered.
Code lock parameter list
No. Function Range
Setting value
Standard
Setting
value
Comments
Procedure
Code lock
000 Changing the master
code
The length (4-6 digits) of
the master code also pre-
determines the length of
the operator code (4-6
digits). Provided the
operator codes are
programmed, only news
codes of the same length
can be entered. If the
code length is to be
changed, all operator
codes must first be
deleted.
0000 - 9999
or
00000 - 99999
or
000000 - 999999
7295 (LED 18 flashes)
Enter the
current code
Confirm (Set)
(LED 19 flashes)
Enter a new code
Confirm (Set)
(LED 20 flashes)
Repeat the new
code
Confirm (Set)
001 Adding an operator code
(max. 600)
0000 - 9999
or
00000 - 99999
or
000000 - 999999
2580 (LED 19 flashes)
Enter a code
Confirm (Set)
(LED 20 flashes)
Repeat the
code entry
Confirm (Set)