background image

0108

.GB

Foreword

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide
sufficient instruction for the safe operation of the industrial truck. The information is
provided clearly and concisely. The chapters are arranged by letter. Each chapter
starts with page 1. The page identification consists of a chapter letter and a page
number.
For example: Page B 2 is the second page in chapter B.

The operating instructions detail different truck models. When operating and servicing
the truck, make sure that the instructions apply to your truck model.

Safety instructions and important explanations are indicated by the following
graphics:

F

Used before safety instructions which must be observed to avoid danger to
personnel.

M

Used before notices which must be observed to avoid material damage.

Z

Used before notices and explanations.

t

Used to indicate standard equipment.

o

Used to indicate optional equipment.

Our trucks are subject to ongoing development. Jungheinrich reserves the right to
alter the design, equipment and technical features of the truck. No guarantee of
particular features of the truck should therefore be inferred from the present operating
instructions

.

 

Copyright

Copyright of these operating instructions remains with 

JUNGHEINRICH AG.

Jungheinrich Aktiengesellschaft 

Am Stadtrand 35
22047 Hamburg - GERMANY

Telephone: +49 (0) 40/6948-0

www.jungheinrich.com

0108

.GB

Foreword

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide
sufficient instruction for the safe operation of the industrial truck. The information is
provided clearly and concisely. The chapters are arranged by letter. Each chapter
starts with page 1. The page identification consists of a chapter letter and a page
number.
For example: Page B 2 is the second page in chapter B.

The operating instructions detail different truck models. When operating and servicing
the truck, make sure that the instructions apply to your truck model.

Safety instructions and important explanations are indicated by the following
graphics:

F

Used before safety instructions which must be observed to avoid danger to
personnel.

M

Used before notices which must be observed to avoid material damage.

Z

Used before notices and explanations.

t

Used to indicate standard equipment.

o

Used to indicate optional equipment.

Our trucks are subject to ongoing development. Jungheinrich reserves the right to
alter the design, equipment and technical features of the truck. No guarantee of
particular features of the truck should therefore be inferred from the present operating
instructions

.

 

Copyright

Copyright of these operating instructions remains with 

JUNGHEINRICH AG.

Jungheinrich Aktiengesellschaft 

Am Stadtrand 35
22047 Hamburg - GERMANY

Telephone: +49 (0) 40/6948-0

www.jungheinrich.com

Содержание ECE 118


















































































Отзывы: