Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 39 / 81

0406
.GB
E 12
Start-up
When the main switch is turned on the LED (16) goes red.
When you enter the correct operator code (factory setting 2-5-8-0) the LED (16) turns
green.
If the wrong code is entered the LED (16) flashes red for two seconds. The correct
code can then be entered again.
Z
The Set key (17) has no function in operating mode
Switching off
To switch the truck off, press the
o
switch (21).
Z
The truck can switch off automatically after a
pre-determined time. To do this, the
corresponding code lock parameter must be
set (refer to Section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
18
17
16
21
20 19
0406
.GB
E 12
Start-up
When the main switch is turned on the LED (16) goes red.
When you enter the correct operator code (factory setting 2-5-8-0) the LED (16) turns
green.
If the wrong code is entered the LED (16) flashes red for two seconds. The correct
code can then be entered again.
Z
The Set key (17) has no function in operating mode
Switching off
To switch the truck off, press the
o
switch (21).
Z
The truck can switch off automatically after a
pre-determined time. To do this, the
corresponding code lock parameter must be
set (refer to Section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
18
17
16
21
20 19