Jungheinrich ECE 118, Руководство по эксплуатации

Страница: 54 / 81

F 3
0708
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the industrial truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The service intervals stated are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of extreme dust, temperature fluctuations or multiple shifts.
The following maintenance checklist specifies the tasks and intervals after which they
should be carried out. The servicing intervals are defined as follows:
W = Every 50 service hours, or at least weekly
A = Every 500 service hours
B = Every 1000 service hours, or at least annually.
C = Every 2000 service hours, or at least annually.
Z
W service intervals are to be performed by the proprietor.
During the run-in period – after approx. 100 service hours – the proprietor must
check the wheel nuts/bolts and re-tighten if necessary.
F 3
0708
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the industrial truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The service intervals stated are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of extreme dust, temperature fluctuations or multiple shifts.
The following maintenance checklist specifies the tasks and intervals after which they
should be carried out. The servicing intervals are defined as follows:
W = Every 50 service hours, or at least weekly
A = Every 500 service hours
B = Every 1000 service hours, or at least annually.
C = Every 2000 service hours, or at least annually.
Z
W service intervals are to be performed by the proprietor.
During the run-in period – after approx. 100 service hours – the proprietor must
check the wheel nuts/bolts and re-tighten if necessary.