JUMO 406060, Руководство по эксплуатации

Страница: 58 / 116

7 Operation
58
Menu / Parameters Description
Device Setup / ...Sensor / ...Operating Mode
Flow Direction Used to set the measuring direction for the sensor.
The device measures and totalizes in both flow directions by default when the device is supplied.
• Forward & Reverse: Used to have the device measure in both flow directions.
• Forward only: Used to have the device measure only in upstream direction.
• Reverse only: Used to have the device measure only in downstream direction.
Default setting: Forward & Reverse
Flow Indication Used to invert the indicated flow direction.
Default setting: Normal
Device Setup / ...Transmitter
...Units Used to select the “...Units” submenu with .
Damping Used to set the damping.
The value set here (0.02 to 60 s) relates to 1 τ (Tau). The value refers to the response time to a sudden mass flow rate step
change.
Default setting: 1 second.
Damping On/Off Used to activate the damping.
Density Fixed Value If the flow is measured and displayed in units of mass, a fixed density value has to be included in the calculations.
A density value from 0.01 to 5.0 g/cm³ can be set to make the conversion to the mass flow rate.
...Cut Off Used to select the “...Cut Off” submenu with .
TX Location TAG Used to enter the meter location for the transformer.
Alphanumeric, max. 20 characters
TX TAG Used to enter the TAG number for the transmitter.
Alphanumeric, max. 20 characters
Device Reset Used to restart the device. Takes the place of a brief interruption of the power supply.
Restore Settings Used to reset all parameter settings accessible to users to the factory default settings.
...Feature Settings Used to select the “
...Feature Settings
” submenu with .
...System Zero Used to select the “...System Zero” submenu with .
Noise Reduction Used to activate noise reduction.
Filter: Off, filter 15, 30, 60 (15: low filtering action; 60: high filtering action)
This setting influences the current output (damping).
Default setting: Off