JUMO 406060, Руководство по эксплуатации

Страница: 56 / 116

7 Operation
56
Menu / Parameters Description
Device Info / ...Transmitter
Transmitter Type Type of sensor, e. g. Fex610.
Transmitter ID ID number of transmitter.
Transm.Serial No. Serial number of transmitter.
...Transmitter Version Used to select the “...Transmitter Version” submenu with .
Transm. Run Hours Operating hours of the transmitter.
Tx Restart Counter Number of restarts (switching on and off of power supply) for the device.
Time since Restart Operating hours of the device since the most recent restart.
...Tx Calibration Used to select the “...Tx Calibration” submenu with .
Manufacturer Name of manufacturer.
Street Manufacturer’s address (street).
City Manufacturer’s address (city).
Phone Manufacturer's address (telephone number).
Device Info / ...Transmitter / ...Transmitter Version
FW Device Ver. Version and part number of the software package for the device.
FW Device Part Nr.
FW Frontend Ver. Version and checksum (CRC) of the software for the front end board (FEB).
FW Frontend CRC
HW Frontend Ver. Hardware version of the front end board (FEB).
Bootloader FEB Ver. Bootloader version of the front end board (FEB).
Curr. Out FW Ver. Version and checksum (CRC) of the software for the current output module.
Curr. Out FW CRC
Device Info / ...Transmitter / ...Tx Calibration
TX Span Transmitter calibration value.
TX Zero
First Cal. Date Date of the first transmitter calibration (calibration of new device).
Last Cal. Date Date of the last transmitter calibration.
Cal. Cert. No. Identification (no.) of the relevant calibration certificate.
First Cal. Location Location of the first transmitter calibration.
Last Cal. Location Location of the last transmitter calibration.