JUMO 406060, Руководство по эксплуатации

Страница: 46 / 116

7 Operation
46
Once you have logged on to the corresponding access level, you
can edit or reset the password. Resetting (“No password defined”
state) is done
by selecting “
” as the password.
Enter Password
**********
QRSTUVWXYZ 0123456
Next OK
4. Enter the corresponding password. No factory default
password has been set; you can access the configuration
level without entering a password.
The selected access level remains active for 3 minutes.
Within this period you can toggle between the process display
and the configuration level without re-entering the password.
5.

Use to confirm the password.
The LCD display now indicates the first menu item on the
configuration level.
6.

Use / to select a menu.
7.Use to confirm your selection.
7.3.5 Selecting and changing parameters
Entry from table
When an entry is made from a table, a value is selected from a
list of parameter values.
Menu name
Parameter name
Currently set value
Next Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the list of available parameter values. The
parameter value that is currently set is highlighted.
Parameter name
Parameter 1
Parameter 2
Parameter 3
Cancel OK
3. Select the desired value using
/ .
4. Confirm the selection with .
This concludes the procedure for selecting a parameter value.
Numerical entry
When a numerical entry is made, a value is set by entering the
individual decimal positions.
Menu name
Parameter name
12.3456 [unit]
Next Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.