JUMO 406060, Руководство по эксплуатации

Страница: 17 / 116

5 Installation
17
5.1.4 Devices with a wafer-type design
1
Threaded rod
2
Nut with washer
3
Centering sleeves
Figure 10: Installation set for wafer-type design (example)
For devices that feature a wafer-type design, the manufacturer
offers an installation set as an accessory part that consists of
threaded rods, nuts, washers and centering sleeves to facilitate
installation.
5.1.5 Flow direction
Figure 11: Flow direction
The device measures the flow rate in both flow directions.
Forward flow is the factory setting, as shown in Figure 11.
5.1.6 Electrode axis
1
Electrode axis
Figure 12: Orientation of the electrode axis
The flowmeter sensor should be mounted in the piping in such a
manner that the electrode axis is oriented as horizontally as
possible.
A maximum deviation of 45° from the horizontal position is
permissible.
5.1.7 Mounting position
Figure 13: Mounting position
A Vertical installation for measuring abrasive materials,
preferably with flow in upward direction.
B For a horizontal installation, the meter tube must always be
completely filled with the measuring medium.
Provide for a slight incline of the connection for degassing.
Note
For hygienic applications, the vertical mounting position is
preferred.
For a horizontal mounting position, make sure that the sensor is
installed to be self-draining.