![background image](http://html1.mh-extra.com/html/jcm/taiko-pub-7-11/taiko-pub-7-11_operation-and-maintenance-manual_3548619056.webp)
P/N 960-100175R_Rev. 4 {EDP #200824}
© 2013, Japan CashMachine Co., Limited
6 - 4
Section 6
Taiko™ Series Banknote Acceptor Calibration
and
Testing
NOTE: Use a Test Bench and a Harness instead of an external Power Supply. A Test Bench and a
Harness are to be dedicated by each individual Country’s User Protocol Specification requirements
as defined in Table 6-1.
Figure 6-8
Taiko Re-Programming Software Tool Connection Configuration
To Serial Port
Maintenance Connector (4-Pin)
Interface Connector (10-Pin)
To Master
Maintenance
Connector
To Interface
Connector
To Interface
Connector
To AC Power
ID-001
Interface
Connector
ID-003
ccTalk/Hll
Connector
To AC Power
To Interface
Connector
a) Taiko™ Unit
b) PC (OS: Windows
®
98SE/2000/XP)
c) VM-450 Supply Unit
(EDP# 059307, JAC# 501-000026RA)
d) JCM Power Supply Unit
(EDP# 116125, JAC# 501-000187RA
or JCME G00176 & G00205) or Equivalent
e) Host Machine
f) Taiko™ Harness “B”
(EDP# 116488, JAC# 400-100573RA
or JCME G00172)
g) VM-450 Supply Unit
(EDP# 739571, JAC# 400-100843RA)
h) Taiko™ Harness “A”
(EDP# 127527, JAC# 400-100551RA
or JCME G00183 for ID-003 &
G00182 for ID-0E3)
i) Host Machine Harness (User prepared).
a
b
c
d
e
f
g
h
i
Table 6-1
Test Bench Interface Protocols
Interface
Protocol
Operating
Label
Interface
Connector
Optional
Connector
ID-003-MDB/
Pulse/ccTalk
*
*. Use JCM Power Supply Unit (EDP# 116125, JAC# 501-000187RA)
or equivalent. Or use Taiko™ Harness “A” (EDP# 127527, JAC# 400-
100551RA or JCME G00183 for ID-003 & G00182 for ID-0E3).
X3
Black
Yes
ID-001
†
†. Use JCM Power Supply Unit (EDP# 059307, JAC# 400-100643RA)
or equivalent VM-450 Harness (EDP# 139571, JAC# 400-
100643RA).
01
White
No
NOTE: When a Taiko™ Unit is installed into
a Host Machine, the Power Supply Unit,
Taiko™ Harness “A” and the VM-450
Connection Harness are not required.