JCM TAIKO PUB-7/11 Скачать руководство пользователя страница 15

Страница: 15 / 84

P/N 960-100175R_Rev. 4 {EDP #200824}

1 - 3

General Information

Taiko™ Series Banknote Acceptor

Section 1

3. Be careful that foreign objects or dust may

intrude the Unit when opening the Guide Area.

4. When closing the Unit, ensure all service door

locks click into place.

5. If the Validator section is dirty due to dust, for-

eign objects or other such debris adhering to it,

the Banknote acceptance rate will degrade.



Clean the Unit once a month to keep its perfor-

mance stable.

6. Use a soft, lint-free cloth, Cotton swab or Com-

pressed Air spray to clean dust and debris from

the Banknote transportation path.

7. Perform cleaning and maintenance regularly

when using the equipment in a place where

excessive Automobile exhaust emission or Ciga-

rette Smoke may exist.

8. Be sure that the Guide or individual Unit Sec-

tions are properly placed in their correct location

following a maintenance procedure.

9. Do not redesign or disassemble the Unit. Unau-

thorized use by inadequately trained personnel,

or use outside the original manufacture’s intent

for operation voids the warranty.

Banknote Fitness Requirements

1. The following Banknote types may not validate

correctly, or can cause a Banknote jam and/or

damage to the Unit’s Transport path. Banknotes

exhibiting the conditions listed below and illus-

trated in Figure 1-3 should be avoided:

• Having perforated or torn areas

• Having excessive folds

• Wet or damp

• Having excessive wrinkles

• Shabby/warn condition

• Adhering foreign objects and/or oil.

Primary Features

The Taiko™ PUB-7/11 Series of Banknote Accep-

tors contains the following primary features:

• Installation and removal of a TAIKO Unit is

very easy because of its clip-on style. Anyone

can install a TAIKO Unit quickly.

• Data scanning frequency can be selected by

setting DIP Switches. Scanning once or twice

is selectable. The acceptance rate can be

improved by setting it to scan twice.

• This JCM patented Anti-Pullback Mechanism

provides powerful protection against Banknote

stringing (fishing). The drum rotates every

time a Banknote passes through the Unit, and

tangles any foreign object attached to the

Banknote such as string and/or tape around

itself.

• One of five rotations is DIP Switch selectable.

The greatest fishing protection is obtained by

selecting the five rotation setting.

Caution: Do not use any Alcohol,
thinner or citrus based products
for cleaning any surfaces. The
Lenses can become clouded by
chemical effect that may cause
acceptance errors.

Damaged Banknotes

Wrinkled Banknotes

Curled Banknotes

Folded or Partial Banknotes

Figure 1-3

Unacceptable Banknotes

Figure 1-4

Installation Simplicity

Figure 1-5

Scan Frequency Capability

Содержание TAIKO PUB-7/11





















































































Результаты поиска

Содержание TAIKO PUB-7/11

Отзывы:

Похожие инструкции для TAIKO PUB-7/11

Бренды по названию

Популярные бренды

JCM TAIKO PUB-7/11, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание TAIKO PUB-7/11

Отзывы:

Похожие инструкции для TAIKO PUB-7/11

Бренды по названию

Популярные бренды