P/N 960-100175R_Rev. 4 {EDP #200824}
© 2013, Japan CashMachine Co., Limited
6 - 5
Calibration and Testing
Taiko™ Series Banknote Acceptor
Section 6
Re-Programming Connection Procedure
When re-programming a Taiko™ Unit the follow-
ing DIP Switch settings and cable connections are
required:
1. On the DIP Switch Block located on the right
side of the Taiko™ Unit, set DIP Switches No.1,
7 and 8 to
ON
.
2. Connect the PC, Harness and Power Supply Unit
cables to the Taiko™ Unit as shown in Figure 6-1
on page 6-1 of this Section.
Ensure that the Taiko™ Unit is connected to the
PC using a Taiko™ Harness “B” to ensure the
proper connection is made to the Taiko™ Unit.
3. Turn the Taiko™ Unit power
ON
.
4. Check that the Front Panel Taiko™ LED flashes
White.
5. Set DIP Switch No.1 to
OFF
.
6. Check that the Taiko™ LED is extinguished.
Serial Number Writer Application Use
When replacing a Taiko™ CPU Circuit Board, per-
form the following steps to write a new Serial
Number onto it:
1. Refer to the previous "Software Downloading
Procedure" on page 6-2 of this Section to prop-
erly perform a PC Software Download, and to
Figure 6-8 on page 6-4 to identify the tools, har-
ness connections and DIP Switch Settings
required to transfer Software to the Taiko™ Unit.
When downloading Software Files from a Palm
Pilot
®
handheld PDA, refer to the related proce-
dures outlined in "Palm Pilot Program Installa-
tion" on page 6-2 of this Section.
2. Double
Mouse-Click
on
SerialNo.exe
in the
Folder created in Step One (1) of "PC Program
Installation" on page 6-2, and then the following
window will appear.
3. Mouse-Click
on
the
Read Serial Number
Screen
a
) and the current Unit’s
Serial Number will be displayed in the Text Box
next to the Button.
4. Enter a new 6-digit Serial Number in the input
Text Box next to the
Write Serial Number
Screen
Button (See Figure 6-9
b
). Example: If the Unit’s
Serial Number is 03050438058, enter the last 6-
digit of the Serial Number into the Text Box (e.g.,
438058).
5. Mouse-click on the Write Serial Number Screen
Button (See Figure 6-9
c
) to begin writing a new
Serial Number into the Taiko™ Memory.
6. When Serial Number writing is complete, the
Taiko™ LED will flash a
Blue
Color.
7. Mouse-click
on
the
Exit
Screen Button
d
) to close the Screen.
Cloning Units
Use the Clone Harness, to copy Software from a
Master Taiko™ Unit to any Slave Taiko™ Unit.
Perform this procedure as often as necessary to
copy Software to all available Taiko™ Units.
Required Items
When cloning Taiko™ Units, the following items
are required:
•
a Taiko™ Unit containing the installed feature
Application Software (Master)
•
the Taiko™ Unit requiring a copy of the
Application Software (Slave)
•
Clone Harness (EDP# 124528, JAC# 400-
100569RA)
•
External JCM Power Supply (EDP# 116125,
JAC# 501-000187RA or JCME G00205 UAC)
•
Taiko™ Harness “A” (EDP# 121797, JAC#
400-100551RA)
•
ID-003/MDB/Pulse/ccTalk Software
•
VM-450 Harness (EDP# 739571, JAC# 400-
100643RA) for ID-001 use only
•
VM-450 Harness (EDP# 739571, JAC# 400-
100643RA) for ID-001 use only.
Refer to the applicable Software Information Sheet
to obtain the required cloning features Software.
C
LONING
P
ROCEDURES
Perform the following steps to Clone a Taiko™
Unit:
1. Connect the Master Taiko™ Unit, the Slave
Taiko™ Unit, the Power Supply Unit and the
Harnesses as illustrated in Figure 6-10.
2. Set Master Taiko™ Unit DIP Switches #1, 2,7
and 8 to ‘
ON
’.
3. Set the Slave Taiko™ Unit DIP Switches #1, 7
and 8 to ‘
ON
’.
4. Confirm that the White LED on the Master
Taiko™ Unit is flashing, and that the
Green
LED
on the Slave Taiko™ Unit is also flashing.
Figure 6-9
JCM Serial Number Writer Screen
New Serial Number
Current Serial Number
a
c
b
d
NOTE: When the CPU Circuit Board is new,
nothing will be displayed in the Text Box.
NOTE: When writing a Serial Number into
Taiko™ Memory using
SerialNo.exe
, the
new Serial Number will be used as the new
Encryption Code Number.
NOTE: When the Taiko™ Unit is connected
to the Host Machine, the Power Supply Unit
and Taiko™ Harness “A” are not required.
