![background image](http://html1.mh-extra.com/html/jcm/ivizion-ld/ivizion-ld_operation-and-maintenance_3544215058.webp)
P/N 960-100929R_Rev. 7 {EDP #148849}
© 2017, JAPAN CASH MACHINE CO., LTD.
4 - 2
Section 4
iVIZION® Series Next-Generation Banknote Acceptor Unit
Disassembly/Reassembly
6. Remove the two (2) Flat Springs, the single (1)
a
), the single (1) Pin
b
), the two (2) Rollers (Figure 4-
c
1
&
c
2
) and the single (1) related pressure Coil
Spring (Figure 4-4
d
) from the Pusher Mechanism
Assembly.
7. Remove the single (1) E-ring (Figure 4-6
a
) and
the single (1) Gear (Figure 4-6
b
) located on the
right side of the Transport Unit.
8. Remove the three (3) Assembly Mounting Screws
e
1
,
e
2
&
e
3
) located on the right side
of the Transport Unit, and remove the Right
Frame Outer “R” Assembly (Figure 4-6
f
) from
the Transport Unit.
9. Remove the single (1) E-ring (Figure 4-7
a
) and
the two (2) Gears (Figure 4-7
b
1
&
b
2
) located on
the left side of the Transport Unit.
10. Remove the three (3) Assembly Mounting Screws
e
1
,
e
2
&
e
3
) and remove the Left
Frame Outer “L” Assembly (Figure 4-7
f
) from
the Transport Unit.
Pusher Mechanism Cover Removal
Figure 4-3
Pusher Mechanism Cover Removal
a
2
a
a
4
a
3
b
Figure 4-4
Stacker Guide Removal
c
1
c
2
NOTE: When reassembling the
Stacker Guide (Figure 4-5
a
),
ensure that the Coil Spring (Figure
b
) is replaced in the correct
direction. When reinserting the Pin
0360, put it in place while lifting the
Flat Leaf Springs upward; then
install the screws securing each Flat
Leaf Spring in place. Apply Screw
Lock Compound to the head of each
screw to secure.
Figure 4-5
Figure 4-5
Stacker Guide Reassembly
a
b
NOTE: Be careful that the parallel Pin
c
) and the related
Bushings (Figure 4-6
d
1
&
d
2
) are not
lost when removed.
Figure 4-6
Figure 4-6
Right Frame Outer “R” Removal
a
b
c
d
1
e
1
e
2
e
3
g
d
2
f
NOTE: When replacing the Frame
Outer “R” Assembly, ensure that the
Plate Nut is correctly re-positioned
g
).
NOTE: Be careful that the parallel
Pin (Figure 4-7
c
) and their related
Bushings (Figure 4-7
d
1
,
d
2
&
d
3
) are
not lost when removed.