JCM ivizion ld, Эксплуатация и обслуживание

Страница: 59 / 158

P/N 960-100929R_Rev. 7 {EDP #148849} © 2017, JAPAN CASH MACHINE CO., LTD.
4 - 3
Disassembly/Reassembly iVIZION® Series Next-Generation Banknote Acceptor Unit Section 4
11. Remove the two (2) Timing Belts (Figure 4-8 a
1
& a
2
) from the Transport Unit.
iVIZION HC Cash Box
To remove the Timing Belt proceed as follows:
1. Remove the Cash Box from the
iVIZION
Unit.
2. Open the Cash Box Door.
3. Remove the two (2) screws (Figure 4-9
a
1
& a
2
)
securing the Pusher Mechanism Unit to the Cash
Box.
4. Slide the Pusher Mechanism Assembly (Figure 4-
9 b ) backward and remove the Pusher Mechanism
Assembly out of the Cash Box
5. Remove the four (4) screws (Figure 4-10 a
1
, a
2
, a
3
& a
4
) securing the HC Box Stacker Base (Figure
4-10 b ) in place, and remove the HC Box Stacker
Base from the Pusher Mechanism Assembly.
6. Remove the four (4) screws (Figure 4-11 a
1
, a
2
, a
3
& a
4
) securing the Pusher Guide (Figure 4-11 b ),
and remove the guide from the Pusher Mecha-
nism.
Figure 4-7 Left Frame Outer “L” Removal
Figure 4-7 Left Frame Outer “L” Removal
a
b
2
b
1
c d
1
d
2
e
1
e
2
e
3
f
g
d
3
NOTE: When replacing the Frame
Outer “L” Assembly, ensure that the
Plate Nut is correctly re-positioned
(Figure 4-7 g ).
Figure 4-8 Timing Belt Removal
Figure 4-8 Timing Belt Removal
a
1
a
2
b
NOTE: The Timing Belts should be
replaced as illustrated in Figure 4-8 b
when reassembling the Unit. Be
careful that the Pulleys and/or
Rollers do not fall off during
reassembly.
Figure 4-9 Pusher Mechanism Removal
Figure 4-9 Pusher Mechanism Removal
a
1
a
2
b
Figure 4-10 HC Box Stacker Base Removal
Figure 4-10 HC Box Stacker Base Removal
a
2
a
1
a
4
a
3
b