JCM ivizion ld, Эксплуатация и обслуживание

Страница: 60 / 158

P/N 960-100929R_Rev. 7 {EDP #148849} © 2017, JAPAN CASH MACHINE CO., LTD.
4 - 4
Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly
7. Remove the single (1) Stacker Guide (Figure 4-12
a ), the single (1) Stacker Guide Sustainer (Pin
0360) (Figure 4-12 b ), the two (2) Rollers (Figure
4-12 c
1
& c
2
) and the single (1) related pressure
Coil Springs (Figure 4-12 d ) from the Pusher
Mechanism Assembly.
8. Remove the two (2) E-rings (Figure 4-14 a
1
& a
2
)
securing the two (2) Gears and then remove the
three (3) Gears (Figure 4-14
b , c & d ) on the right
side of the Pusher Assembly.
9. Remove the three (3) Assembly Mounting Screws
(Figure 4-15 a
1
, a
2
& a
3
) and the Stacker Home
Prism (Figure 4-15 b ) located on the right side of
the Pusher Assembly, and remove the Right
Frame Outer R Assembly (Figure 4-15 c ) from
the Pusher Assembly.
10. Remove the Stacker Home Lever (Figure 4-15 d )
and the Plate Nut (Figure 4-15 e ).
11. Remove the single (1) Gear (Figure 4-15 f ) from
the Pusher Assembly.
12. Remove the two (2) Assembly Mounting Screws
(Figure 4-16 a
1
& a
2
).
13. Remove the single (1) E-ring (Figure 4-16 b ) and
the single (1) Gear (Figure 4-16 c ) from the Outer
Guide L (Figure 4-16 d )
Figure 4-11 Pusher Guide Removal
Figure 4-11 Pusher Guide Removal
a
2
a
1
a
4
a
3
Figure 4-12 Stacker Guide Removal
Figure 4-12 Stacker Guide Removal
b
d
a
c
1
c
2
NOTE: When reassembling the
Stacker Guide (Figure 4-13 a ),
ensure that the Coil Spring (Figure 4-
13 b ) is replaced in the correct
direction.
Figure 4-13 Stacker Guide Reassembly
Figure 4-13 Stacker Guide Reassembly
a
b
NOTE: Be careful that the parallel Pin
(Figure 4-14 e ), the bushing (Figure
4-14 f ) and the E-ring (Figure 4-14 g )
are not lost when removing them.
Figure 4-14 Outer Guide R Removal 1
Figure 4-14 Outer Guide R Removal 1
b
c
d
g
f
e
a
1
a
2
NOTE: Be careful that the two
bushings are not lost when removing
them.
NOTE: Be careful that the single
Parallel Pin (Figure 4-15 g ) is not lost
when removing it.
Figure 4-15 Outer Guide R Removal 2
Figure 4-15 Outer Guide R Removal 2
b
d
g
c
e
f
a
2
a
1
a
3
NOTE: When replacing the Frame
Outer R Assembly, ensure that the
Plate Nut (Figure 4-15 e ) is correctly
re-positioned.